Key Facts
- 3-in-1 connectors — Type-C, micro USB and 5-pin
- Inputs — USB or USB Type-C
- Up to 5V/2A current
- 39-inch braided cable — tangle-free design
- Light-up LED logo — laser engraving is required to enable the logo light feature
Description
The Traverse 3-in-1 Charging Cable combines Type-C, micro USB and 5-pin connectors with USB and USB Type-C inputs, eliminating the need to carry multiple cables. It supports up to 5V/2A current and can charge multiple devices at once, and the braided cable has an overall length of 39 inches.
An LED logo lights up while the cable is charging. Laser engraving is required to enable the light-up logo feature.
Specifications
| Brand | Ariel EDGE |
|---|---|
| Material | ABS, PVC, fabric |
| Dimensions | 2 in depth x 0.375 in width x 1 in height |
| Weight | 0.13 lb |
| Packaging | Individual poly bag |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Heat Transfer — Crystal Print, Laser and Pad Print are available on the Traverse 3-in-1 Charging Cable.
Heat Transfer — Crystal PrintPMSone-time setup $60.00 · Full color
Crystal Print is a full-color imprint producing high-definition graphics with a glossy, decal-like surface and a subtle raised effect you can see and feel. It reproduces photographs, gradients, and detailed multi-color artwork with fine detail intact. Color is a full-color process blend that comes close to brand references rather than matching exact spot inks.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Pad PrintPMS1 color/location included · one-time setup $60.00 · Up to 1 color
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 100–249 pieces $5.52 each, 250–499 pieces $5.33 each, 500–999 pieces $5.15 each, 1,000–2,499 pieces $4.90 each, 2,500–5,000 pieces $4.68 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Crystal Print (one-time setup $60.00 · Full color); Laser (one-time setup $60.00); Pad Print (1 color/location included · one-time setup $60.00 · Up to 1 color).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/218033.
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: AIM0001992IN STOCK
SKU: AIM0001992
Ariel EDGE Traverse 3-in-1 Charging Cable
Starting At$4.68each, imprint included — one-time setup charged separately
A practical giveaway for trade shows, onboarding kits and conference swag.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!