Promotion Pros
  • The Signature Canvas Tote Bag, 23 Liter Recycled Cotton Tote
  • The Signature Canvas Tote Bag, 23 Liter Recycled Cotton Tote — view 2
  • The Signature Canvas Tote Bag, 23 Liter Recycled Cotton Tote — view 3
  • The Signature Canvas Tote Bag, 23 Liter Recycled Cotton Tote — view 4
  • The Signature Canvas Tote Bag, 23 Liter Recycled Cotton Tote — view 5

Key Facts

  • 70% recycled cotton / 30% post-consumer polyester — recycled content carries through the woven canvas
  • Aware™ Traceability with Digital Passport — supply chain traceability travels with the bag
  • Four deep outer pockets — separate compartments keep small items within reach
  • Expandable bottom gusset — the base widens to take on a fuller load
  • Enhanced "X" handle stitching — reinforced stitch pattern at the handle joins
  • Striped webbed handle with folded stitch — a folded stitch detail at the easy-carry grip

Description

The Signature Canvas Tote Bag is a 23-liter carry built from 70% recycled cotton and 30% post-consumer polyester, woven into a canvas body that measures 19.3" w x 13.38" h. Four deep outer pockets run along the outside for quick-reach storage, an inner pocket keeps smaller items separated, and a button snap closure holds the top together. An expandable bottom gusset widens the base when the load grows.

The striped webbed handle uses an easy-carry folded stitch, and the handle joins are reinforced with an enhanced "X" stitch pattern. Aware™ Traceability with a Digital Passport accompanies the bag, so the recycled fiber content can be followed back through the supply chain.

Your artwork lands on the front panel by Heat Transfer — Four Color / 4CP, which lays photographic, multi-color artwork onto the fabric as a smooth, thin bonded film, or by Embroidery, which stitches your design in colored thread for a raised, textured mark.

Specifications

Material70% recycled cotton / 30% post-consumer polyester
Dimensions19.3" w x 13.38" h
Pockets4 deep outer pockets; 1 inner pocket
StrapStriped webbed handle with easy-carry folded stitch
OriginImported, decorated in USA

Decoration & Imprint

2 methods

Your imprint is placed on the front panel of the tote. Heat Transfer — Four Color / 4CP suits photographic, gradient-rich, or many-color artwork where tonal blends and fine detail must reproduce faithfully; Embroidery suits logos and lettering built from bold, solid shapes, where each color is a flat spot color and a raised, textured finish adds value.

Heat Transfer — Four Color / 4CPFull-color imprint · 1 location included · no setup charge

Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.

Locations & sizes
Front Pocket 5" W × 4" H
Max colors
Full color
Minimum order
25 pieces
Included
✓ Full-color imprint in one location — no setup charge
Embroideryno setup charge · Full color

Embroidery stitches your design directly into the fabric, building artwork from dense, interlocking threads rather than laying ink on the surface. Each color is its own thread in a solid shade. The result is a raised, tactile mark with the soft sheen of thread and a slightly dimensional edge. Each shape reads as a clean, saturated block, and the sewn-in design resists fading, peeling, and wear through repeated washing.

Locations & sizes
Front Pocket 5" W × 4" H
Max colors
Full color
Minimum order
25 pieces

Production & Delivery

7 business days production
  • Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
  • Production: 7 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
  • FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.

Arrival dates are shown at checkout.

Questions & Answers

Ask about sizing, imprinting or turnaround
What is the minimum order quantity?
The minimum order is 25 pieces with Heat Transfer — Four Color / 4CP.
How much does it cost per unit?
Pricing falls with quantity: 25–49 pieces $50.08 each, 50–99 pieces $49.43 each, 100–299 pieces $48.82 each, 300–599 pieces $47.98 each, 600–999 pieces $47.22 each, 1,000–5,000 pieces $46.53 each. Prices are per unit, imprint included.
Is there a setup charge?
No setup charge.
How long does production take?
Production takes 7 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
What decoration methods are available?
Heat Transfer — Four Color / 4CP (Full-color imprint · 1 location included · no setup charge); Embroidery (no setup charge · Full color).

From our decoration and product guides

What is a heat transfer imprint?
Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
Can heat transfer print photographs or gradients?
Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
What does an embroidered logo look like?
Embroidery stitches the design directly into the fabric, building the artwork from dense, interlocking threads rather than laying ink on the surface. Each color is its own thread in a solid shade. The result is a raised, tactile mark with the soft sheen of thread and a slightly dimensional edge, and the sewn-in design resists fading, peeling and wear through repeated washing. More about Embroidery →

Customer Reviews

No product reviews yet

No product reviews yet for this item.

SKU: TRN0000327IN STOCK

SKU: TRN0000327

The Signature Canvas Tote Bag, 23 Liter Recycled Cotton Tote

Starting At$46.53each, imprint included

A practical pick for travel, trade shows, and employee kits.

A 23-liter canvas tote in 70% recycled cotton and 30% post-consumer polyester, with four outer pockets and a button snap closure. Your artwork is applied by Heat Transfer — Four Color / 4CP or stitched in thread with Embroidery.

Chat with or Call Our Friendly Wisconsin Staff

Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!

Chat with a live person