Key Facts
- 1,680D ballistic polyester — dense weave resists abrasion and daily wear
- Dedicated zippered laptop compartment — fits up to a 17-inch laptop
- Air mesh shoulder straps — breathable padding for comfortable carry
- Padded mesh luggage trolley pass-through — slides over rolling luggage handles
- Tricot-lined valuables pocket — soft lining protects phones and sunglasses
Description
The Port Authority Exec Backpack is built from 1,680D ballistic polyester, a dense weave that resists abrasion and daily wear. A dedicated zippered laptop compartment holds up to a 17-inch laptop, while the front zippered pocket includes an extensive organization panel for accessories.
Air mesh shoulder straps and a padded mesh luggage trolley pass-through make it comfortable to carry through airports and commutes. A tricot-lined valuables pocket protects phones and sunglasses, and side mesh pockets keep water bottles within reach.
Specifications
| Brand | Port Authority |
|---|---|
| GTIN | 00191265816601 |
| Material | 1,680D ballistic polyester (solid); 300D two-tone poly/1,680D polyester (heather) |
| Dimensions | 18.75"h x 14.5"w x 8.75"d |
| Weight | 40 oz |
| Pockets | Front zippered pocket with organization panel; tricot-lined valuables pocket; side mesh pocket |
| Strap | Air mesh shoulder straps |
Decoration & Imprint
2 methods
Your logo is embroidered directly into the front of the backpack, creating a raised, textured mark with the soft sheen of real stitching. For photographic or gradient-rich artwork, heat transfer — four color / 4CP applies a smooth, thin bonded film that reproduces fine detail faithfully.
Embroideryone-time setup $35.00 · Full color
Embroidery stitches your design directly into the fabric, building artwork from dense, interlocking threads rather than laying ink on the surface. Each color is its own thread in a solid shade. The result is a raised, tactile mark with the soft sheen of thread and a slightly dimensional edge. Each shape reads as a clean, saturated block, and the sewn-in design resists fading, peeling, and wear through repeated washing.
Heat Transfer — Four Color / 4CPFull-color imprint · 1 location included · one-time setup $30.00
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Production & Delivery
approx. 5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: approximately 5 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 18 pieces with Heat Transfer — Four Color / 4CP.
- How much does it cost per unit?
- Pricing falls with quantity: 18–23 pieces $66.38 each, 24–47 pieces $66.26 each, 48–71 pieces $66.12 each, 72–143 pieces $65.97 each, 144–5,000 pieces $65.97 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $30.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Embroidery (one-time setup $35.00 · Full color); Heat Transfer — Four Color / 4CP (Full-color imprint · 1 location included · one-time setup $30.00).
From our decoration and product guides
- What does an embroidered logo look like?
- Embroidery stitches the design directly into the fabric, building the artwork from dense, interlocking threads rather than laying ink on the surface. Each color is its own thread in a solid shade. The result is a raised, tactile mark with the soft sheen of thread and a slightly dimensional edge, and the sewn-in design resists fading, peeling and wear through repeated washing. More about Embroidery →
- What artwork is a poor fit for embroidery?
- Hairline strokes, very small type and continuous-tone gradients. Each stitch occupies real space in the fabric, so fine lines and small text round off and shading cannot be reproduced. Embroidery is at its best with logos and lettering built from bold, solid shapes, where each color stitches as its own thread shade. For photographic or gradient artwork choose a full-color method; for crisp hairline detail choose screen print. More about Embroidery →
- How are embroidery thread colors matched to my brand colors?
- Each color in the design is stitched in a solid thread shade chosen to match your artwork. Where a product offers it, Pantone (PMS) color matching is an option for an additional charge per color, selecting the thread closest to your Pantone reference; otherwise the embroiderer picks the nearest standard thread color. More about Embroidery →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SNR0004654IN STOCK
SKU: SNR0004654
Port Authority Exec Backpack
Starting At$65.97each, imprint included — one-time setup charged separately
A practical choice for travel, trade shows, and employee kits.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!