Key Facts
- Made of recycled ABS — post-consumer plastic melted down to create new ABS
- Extra bright white LED — light shines through the imprint for visibility
- Stylus on top — push down to turn light on/off
- Rubber grip — provides writing comfort and control
Description
Eco-Friendly Construction
The Sanibel Light Stylus Pen is made of recycled ABS, a material obtained by melting down post-consumer ABS plastic to create new ABS. This sustainable approach reduces waste and gives the pen a responsible origin story.
Illuminated Writing
An extra bright white LED light shines through the imprint, making your message visible even in low light. The stylus on top doubles as a light switch—push down to turn it on or off. A rubber grip ensures comfortable writing and control.
Practical Design
With a twist action mechanism and batteries included, this pen is ready to use right out of the box. Its compact size and lightweight build make it easy to carry and distribute.
Specifications
| Material | Recycled ABS |
|---|---|
| Length | 5.5 in |
| Weight | 0.04 lb |
| Mechanism | Twist action |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Your imprint is placed on the pen barrel, where the LED light shines through it for a distinctive illuminated effect. Laser etching is available, which creates a permanent, recessed mark in the material's own tone, ideal for single-tone logos and fine line work.
Laserone-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 100–249 pieces $2.02 each, 250–499 pieces $1.96 each, 500–999 pieces $1.90 each, 1,000–2,499 pieces $1.82 each, 2,500–5,000 pieces $1.75 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $100.00 per order.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Laser (one-time setup $100.00).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/105734.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP01675IN STOCK
SKU: HTP01675
Sanibel Light Stylus Pen with LED
Starting At$1.75each
Ideal for giveaways, front-desk handouts, and mailers.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!