Key Facts
- 90% recycled 18/8 stainless steel — inner and outer walls are vacuum sealed
- Vacuum insulated with copper lining — keeps drinks cold for 24 hours
- Leak-resistant screw-top lid — straw spout allows sipping without unscrewing
- Removable silicone base — adds stability and protects from bumps and scrapes
- FDA compliant and BPA free — safe for everyday hydration
Description
Built for Hydration
The Pelican Pacific™ water bottle is crafted from 90% recycled 18/8 stainless steel, with double-wall vacuum insulation and a copper lining that keeps iced drinks cold for 24 hours. Its leak-resistant screw-top lid with straw spout makes sipping easy, while the ergonomic swing handle and removable silicone base add convenience and protection.
Sustainable and Safe
Made with sustainability in mind, this bottle uses recycled materials without compromising performance. It is FDA compliant and BPA free, ensuring safe everyday use. The durable powder-coat finish and cup-holder-friendly design make it a practical choice for any adventure.
Customization
Your logo can be laser engraved into the surface, creating a permanent, recessed mark that won't fade or peel. This method is ideal for single-tone logos and fine line work, offering a clean, professional look that lasts.
Specifications
| Brand | Pelican |
|---|---|
| Material | 18/8 Stainless Steel |
| Capacity | 26 oz. |
| Dimensions | 3.5" D x 3.25" W x 10.5" H |
| Weight | 1.75 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your logo is laser engraved onto the front face of the bottle, etched into the surface for a permanent, recessed mark in the material's own tone. For full-color artwork, a heat transfer can be applied as a smooth bonded layer.
Laser — laserX (branded)one-time setup $62.50
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Heat Transfer — Full Colorone-time setup $62.50 · Full color
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 12 pieces with Laser — laserX (branded).
- How much does it cost per unit?
- Pricing falls with quantity: 12–23 pieces $42.86 each, 24–47 pieces $41.38 each, 48–95 pieces $40.00 each, 96–5,000 pieces $38.10 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $62.50 per order.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser — laserX (branded) (one-time setup $62.50); Heat Transfer — Full Color (one-time setup $62.50 · Full color).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: LGK0004248IN STOCK
SKU: LGK0004248
Pelican Pacific™ 26 oz. Recycled Double Wall Stainless Steel Water Bottle
Starting AtWas $39.25 Now $38.10each
A great choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!