Key Facts
- Output — 300 lumens (flashlight), 200 lumens (floodlight), 350 lumens (Dual-Light™)
- Beam range — 201 m
- Waterproof rating — IP-X7
- Housing — PC/ABS, impact and chemical resistant
- Battery — three AA batteries included
Description
The Nightstick® Dual-Light™ Flashlight provides 300 lumens in flashlight mode, 200 lumens in floodlight mode, and 350 lumens when the flashlight and floodlight are used at the same time. Two body switches control momentary or constant-on operation and the floodlight separately, and integrated tail cap and clip magnets allow hands-free use. The PC/ABS housing is impact and chemical resistant, has a non-slip grip, and carries an IP-X7 waterproof rating.
The flashlight includes three AA batteries, a removable lanyard and a 1000D water repellent bag. It is offered in yellow and green.
Specifications
| Brand | Nightstick / Bayco |
|---|---|
| Material | PC/ABS |
| Dimensions | 7.25 in depth x 1.75 in width x 2 in height |
| Weight | 1.16 lb |
| Battery | 3 x AA |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Digital Print and Laser are available.
Digital Printone-time setup $60.00 · Full color
Digital printing reproduces artwork from a digital file on the product's supported print medium. This may be the item itself or a separate label; the product source determines the medium and attachment. Achievable detail, finish and color matching depend on the product and supplier.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 9 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 9–17 pieces $83.74 each, 18–35 pieces $80.85 each, 36–71 pieces $78.16 each, 72–5,000 pieces $74.43 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Digital Print (one-time setup $60.00 · Full color); Laser (1 location included · one-time setup $60.00).
From our decoration and product guides
- What is digital full-color printing?
- Digital printing sends the artwork straight from file to the item with no plates or per-color screens, laying every color down in a single pass. It carries photographs, gradients, drop shadows and dense multi-color artwork at high resolution, reading as a flat image on the surface, and holds fine detail and small type cleanly. More about Full Color →
- Does digital printing match Pantone colors exactly?
- A specific brand color is rendered as a close full-color process simulation rather than an exact spot ink, and on colored items the substrate shifts the appearance. Digital printing is the right choice when the artwork is photographic, has gradients or carries more colors than clean solids can capture. When a brand color must reproduce as an exact, edge-to-edge solid, choose screen print. More about Full Color →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0001827IN STOCK
SKU: SAE0001827
Nightstick® Dual-Light™ Flashlight
Starting At$74.43each, imprint included — one-time setup charged separately
A practical pick for homeowners, employee safety programs and home-improvement promotions, and useful for client gifts.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!