Key Facts
- 650-lumen output — high, medium, low, and strobe modes for versatile use
- IP-X7 waterproof — survives immersion up to 1 meter for 30 minutes
- Impact and chemical resistant — glass-filled nylon polymer housing withstands drops and solvents
- Rechargeable lithium-ion battery — includes wall and vehicle chargers for convenient power
- Serialized for identification — each unit has a unique serial number for tracking
Description
Built for Duty
The Nightstick® Polymer Multi-Function Duty Flashlight delivers 650 lumens of CREE® LED output in high, medium, low, and strobe modes. Its glass-filled nylon polymer housing is impact and chemical resistant, while the aircraft-grade 6061-T6 aluminum bezel and tail-cap feature a Type III hard anodized finish for added durability. The IP-X7 rating means it withstands immersion in water up to 1 meter for 30 minutes.
Convenient Power and Control
A rechargeable lithium-ion battery powers the flashlight, and the included wall and vehicle chargers keep it ready for use. The body and tail cap tandem switch allows momentary or constant-on operation. Each unit is serialized for personal identification.
Custom Branding
Your logo is laser engraved into the tailcap, creating a permanent, recessed mark that won't wear off. The imprint area measures 0.75"h x 4.75"w.
Specifications
| Brand | Nightstick / Bayco |
|---|---|
| Material | Glass-filled nylon polymer housing; 6061-T6 aluminum bezel and tail-cap with Type III hard anodized finish |
| Dimensions | 8.9" x 1.625" x 1.625" |
| Weight | 2.0 lb |
| Battery | 1x rechargeable lithium-ion (included) |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Your logo is laser engraved into the tailcap of the flashlight, creating a permanent, recessed mark in the material's own tone. This method is best for single-tone logos, fine line work, and small text where a dimensional mark matters more than color.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 3 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 3–11 pieces $262.49 each, 12–35 pieces $253.44 each, 36–71 pieces $244.99 each, 72–5,000 pieces $233.32 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Laser (one-time setup $60.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- Where are your products made?
- The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0001163IN STOCK
SKU: SAE0001163
Nightstick® Polymer Multi-Function Duty Flashlight
Starting At$233.32each
Ideal for client gifts, employee safety programs, and home-improvement promotions.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!