What is the minimum order quantity?

The minimum order is 12 pieces with M3A DIA Standard Set-Up.

How much does it cost per unit?

Pricing falls with quantity: 12–23 pieces $13.15 each, 24–35 pieces $12.70 each, 36–47 pieces $12.27 each, 48–71 pieces $11.69 each, 72–95 pieces $11.16 each, 96–107 pieces $10.67 each, 108–143 pieces $10.37 each, 144–287 pieces $10.67 each, 288–575 pieces $10.67 each, 576–5,000 pieces $10.67 each. Prices are per unit, imprint included — one-time setup charged separately.

Is there a setup charge?

Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.

How long does production take?

Production takes 20 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.

Key Facts

Precision aluminum alloy case — machined from high-strength aluminum with a corrosion-resistant anodized finish
Water and shock resistant — sealed with O-rings to withstand wet conditions and everyday drops
Linear-focusing beam — twist the head to adjust from a wide flood to a focused spot, reaching 31 meters
Spare lamp inside tail cap — a backup bulb is stored in the tail cap for on-the-go replacement
Packaged in a black gift box — includes two AAA alkaline batteries and a pocket clip, ready to present

Description

The Mini Maglite® AAA Flashlight is machined from high-strength aluminum alloy and finished with a durable anodized coating that resists corrosion. Its compact, 5-inch body slips easily into a pocket or bag, making it a practical everyday carry. A linear-focusing head adjusts the beam from a wide flood to a concentrated spot, reaching up to 31 meters, while O-ring seals protect the internals from water and shock.

A spare lamp is stored inside the tail cap, so a backup bulb is always within reach. The flashlight arrives in a black gift box with two AAA alkaline batteries and a pocket clip, making it presentation-ready for recipients.

Specifications

Brand	Beacon
Material	Aluminum
Dimensions	5" L
Battery	2 AAA (included)
Origin	Made in USA

Decoration & Imprint

2 methods

Your mark is laser engraved into the barrel or head of the flashlight, etched into the surface for a permanent, recessed imprint in the material's own tone.

Laserone-time setup $60.00

Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.

Locations & sizes

M3A Head 0.75 Inches W × 0.44 Inches H, Side 1 1.75 Inches W × 0.31 Inches H, M3A Laser Engraved Head 0.75 Inches W × 0.44 Inches H

Minimum order

12 pieces

Charges

Setup$60.00 one-time

M3A DIA Standard Set-UpFull-color imprint · 1 location included · one-time setup $60.00

Locations & sizes

M3A Head 0.75 Inches W × 0.44 Inches H, Side 1 1.75 Inches W × 0.31 Inches H, M3A Laser Engraved Head 0.75 Inches W × 0.44 Inches H

Max colors

Full color

Minimum order

12 pieces

Included

✓ Full-color imprint in one location — one-time setup $60.00 applies

Charges

Setup$60.00 one-time

Production & Delivery

20 business days production

Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
Production: 20 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.

Arrival dates are shown at checkout.

Questions & Answers

Ask about sizing, imprinting or turnaround

What is the minimum order quantity?: The minimum order is 12 pieces with M3A DIA Standard Set-Up.
How much does it cost per unit?: Pricing falls with quantity: 12–23 pieces $13.15 each, 24–35 pieces $12.70 each, 36–47 pieces $12.27 each, 48–71 pieces $11.69 each, 72–95 pieces $11.16 each, 96–107 pieces $10.67 each, 108–143 pieces $10.37 each, 144–287 pieces $10.67 each, 288–575 pieces $10.67 each, 576–5,000 pieces $10.67 each. Prices are per unit, imprint included — one-time setup charged separately.
Is there a setup charge?: Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
How long does production take?: Production takes 20 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
What decoration methods are available?: Laser (one-time setup $60.00); M3A DIA Standard Set-Up (Full-color imprint · 1 location included · one-time setup $60.00).

From our decoration and product guides

What does laser engraving look like on a promotional product?: Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Can laser engraving be done in my brand color?: No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
Where are your products made?: The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →

Customer Reviews

No product reviews yet

No product reviews yet for this item.

SKU: BAN0001344IN STOCK

SKU: BAN0001344

Mini Maglite® AAA Flashlight

Name: Mini Maglite® AAA Flashlight
SKU: BAN0001344
Price: 10.37 USD
Availability: InStock

Starting At$10.37each, imprint included — one-time setup charged separately

A practical choice for employee safety programs, home-improvement promotions, and client gifts.

A slender, pocket-sized flashlight machined from high-strength aluminum alloy with an anodized finish. Your mark is laser engraved into the barrel or head as a permanent, recessed imprint in the material's own tone.

Chat with or Call Our Friendly Wisconsin Staff

Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!