Key Facts
- Large open main compartment — packs quickly without working around dividers
- Collapses for storage — folds down when the work or errands are done
- Shoulder-length handles plus side carry handles — two ways to lift a loaded tote
- Three gusseted front slip pockets — separate small items from the main load
- Two side mesh pockets — hold bottles and gear upright and visible
- Wrapped bottom board — gives the base structure so the bag stands and holds shape
Description
The Good Value™ Medium Utility Tote is a 600D polyester bag with a PVC backing, sized for everyday hauling. Its large open main compartment takes groceries, gear, or supplies without dividers to work around, and the wrapped bottom board gives the base enough structure to hold its shape while loaded.
Organization is built in: three gusseted front slip pockets keep small items separated from the main load, and two side mesh pockets hold bottles and loose gear upright and visible. Shoulder-length handles and additional side carry handles give you two ways to lift a full tote, and the bag collapses for storage between uses.
Your artwork is applied to the front of the tote in Heat Transfer — Spot Color, Full Color, or Embroidery, so a logo can be reproduced as solid spot inks, as a full-color image, or as stitched thread.
Specifications
| Brand | Good Value |
|---|---|
| Material | 600D Polyester with PVC Backing |
| Dimensions | 17.9375" W x 10.4375" H x 8.875" D |
| Pockets | Three gusseted front slip pockets; two side mesh pockets |
| Strap | Shoulder-length handles and additional side carry handles |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your imprint lands on the front face of the tote. Heat Transfer — Spot Color bonds premixed solid inks to the fabric for bold spot-color logos; Full Color reproduces photographs, gradients, and unlimited colors; Embroidery stitches your design in thread for a raised, textured mark. Route solid spot-color marks to Heat Transfer — Spot Color, image-based artwork to Full Color, and bold solid shapes to Embroidery.
Heat Transfer — Spot ColorPMS1 color/location included · one-time setup $55.00 · Up to 1 color
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Full ColorPMSone-time setup $55.00 · Full color
The supplier lists this decoration only as full color, so the one thing it establishes is coloration: the artwork carries as many colors as it needs — photographs, gradients, blends, and dense multi-color detail — rather than a counted set of solid inks, and there is no color count to choose. How the color reaches the item (direct print, transfer, decal, or sublimation) is the supplier's choice for this product and is not stated in their data, so surface feel, finish, and durability follow that process rather than this label.
EmbroideryPMSone-time setup $55.00 · Full color
Embroidery stitches your design directly into the fabric, building artwork from dense, interlocking threads rather than laying ink on the surface. Each color is its own thread in a solid shade. The result is a raised, tactile mark with the soft sheen of thread and a slightly dimensional edge. Each shape reads as a clean, saturated block, and the sewn-in design resists fading, peeling, and wear through repeated washing.
Production & Delivery
2 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 2 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 35 pieces with Heat Transfer — Spot Color.
- How much does it cost per unit?
- Pricing falls with quantity: 35–99 pieces $15.98 each, 100–149 pieces $15.42 each, 150–249 pieces $14.91 each, 250–499 pieces $14.20 each, 500–5,000 pieces $13.55 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 2 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Heat Transfer — Spot Color (1 color/location included · one-time setup $55.00 · Up to 1 color); Full Color (one-time setup $55.00 · Full color); Embroidery (one-time setup $55.00 · Full color).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does an embroidered logo look like?
- Embroidery stitches the design directly into the fabric, building the artwork from dense, interlocking threads rather than laying ink on the surface. Each color is its own thread in a solid shade. The result is a raised, tactile mark with the soft sheen of thread and a slightly dimensional edge, and the sewn-in design resists fading, peeling and wear through repeated washing. More about Embroidery →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0003866IN STOCK
SKU: BCC0003866
Good Value™ Medium Utility Tote with Side Carry Handles
Starting At$13.55each, imprint included — one-time setup charged separately
A practical pick for travel, trade shows, and employee kits.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!