Key Facts
- Tapered, handle-free design — for precise, consistent dough control and maximum maneuverability.
- 22-inch length — measures 1.4 inches in diameter at the widest point.
- Materials — acacia wood and cotton.
- Storage bag included — the rolling pin comes with a storage bag.
- Hand wash — wipe with soap and water and towel dry promptly.
Description
The La Cuisine™ French Rolling Pin has a tapered, handle-free design for precise, consistent dough control and maximum maneuverability. The 22-inch length makes rolling out pie and pastry dough, cookies, pizza and more faster and easier, and the pin measures 1.4 inches in diameter at the widest point. Pressure is applied outward by the hands, making it easier to roll delicate dough with fewer strokes.
Hand wash; wipe with soap and water and towel dry promptly, and periodically apply butcher block oil to preserve the wood. Wood products are prone to color variances and will vary between lots. Due to the nature of the wood material, variations in laser imprinting quality and consistency may occur.
Specifications
| Brand | La Cuisine |
|---|---|
| Material | Acacia Wood, Cotton |
| Dimensions | 22 in length x 1.4 in diameter at widest point |
| Weight | 0.77 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Heat Transfer, Laser and Print decoration options are available.
Print1 color/location included · one-time setup $110.00 · Up to 2 colors
Heat Transfer1 color/location included · one-time setup $110.00 · Up to 4 colors
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Laser1 location included · one-time setup $70.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
approx. 5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: approximately 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 30 pieces with Print.
- How much does it cost per unit?
- Pricing falls with quantity: 30–49 pieces $19.26 each, 50–99 pieces $18.60 each, 100–299 pieces $17.98 each, 300–5,000 pieces $17.12 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $110.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Print (1 color/location included · one-time setup $110.00 · Up to 2 colors); Heat Transfer (1 color/location included · one-time setup $110.00 · Up to 4 colors); Laser (1 location included · one-time setup $70.00).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: GME0001599IN STOCK
SKU: GME0001599
La Cuisine™ French Rolling Pin with Storage Bag
Starting At$17.12each, imprint included — one-time setup charged separately
Ideal for homeowners who bake and as a client gift.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!