Key Facts
- Universal fit — designed to insulate nearly all 12 oz and 16 oz cans and bottles
- Temperature retention — keeps contents cold for 12+ hours and hot for 6+ hours
- Stainless steel construction — double-wall vacuum-insulated
- Silicone lid — locks cans and bottles in place
- Non-slip silicone bottom — cup holder compatible
- Fit note — does not fit Modelo bottles
Description
The Frost Buddy® Universal Buddy 2.0 is a universal can cooler designed to insulate nearly all 12 oz and 16 oz cans and bottles (500+ drinks). Double-wall vacuum insulation keeps contents cold for 12+ hours and hot for 6+ hours, and the silicone lid locks cans and bottles in place.
It does not fit Modelo bottles. Powder-coated styles (laser engraved only), silicone rings and straws are dishwasher safe; glitter and graphic styles are hand wash only.
Specifications
| Brand | Frost Buddy |
|---|---|
| Material | Stainless steel |
| Dimensions | 3.125 in W x 3.125 in D x 6.375 in H |
| Weight | 0.92 lb |
| Care | Powder-coated styles (laser engraved only), silicone rings and straws: dishwasher safe; glitter and graphic styles: hand wash only |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Full Color, Laser and Screen Print decoration are available on this can cooler.
Full Colorone-time setup $60.00 · Full color
The supplier lists this decoration only as full color, so the one thing it establishes is coloration: the artwork carries as many colors as it needs — photographs, gradients, blends, and dense multi-color detail — rather than a counted set of solid inks, and there is no color count to choose. How the color reaches the item (direct print, transfer, decal, or sublimation) is the supplier's choice for this product and is not stated in their data, so surface feel, finish, and durability follow that process rather than this label.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen Print1 color/location included · one-time setup $60.00 · Up to 4 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 25–49 pieces $37.49 each, 50–99 pieces $36.20 each, 100–249 pieces $34.99 each, 250–5,000 pieces $33.32 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Full Color (one-time setup $60.00 · Full color); Laser (1 location included · one-time setup $60.00); Screen Print (1 color/location included · one-time setup $60.00 · Up to 4 colors).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002293IN STOCK
SKU: SAE0002293
Frost Buddy® Universal Buddy 2.0 Can Cooler - Smile
Starting At$33.32each, imprint included — one-time setup charged separately
A useful option for employee gifts, client gifts and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!