Foil stamping (hot stamping) presses a thin metallic foil onto the surface with a heated metal die, bonding it where the die makes contact and leaving a shallow pressed-in impression. The mark reads as a single reflective metallic tone: it throws light at some angles and darkens to an outline of itself at others, giving the logo depth against the base. Solid shapes and bold lettering hold cleanly; very fine lines and small text can soften as the foil seats under pressure.

Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.

Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.

Debossing presses your design into the material with a heated die, displacing the surface to leave a recessed impression below the surrounding plane. No ink, no added color. The mark is the substrate itself — a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker; bold logos and simple type carry well, while intricate detail rounds and loses definition.