Key Facts
- Fully insulated main compartment — heat-sealed liner holds six cans plus ice
- 600 denier polyester shell — built to stand up to repeated outings
- Two zippered outside pockets — mesh organizers keep small gear in place
- Two mesh side pockets — quick access for a drink or a phone
- Carry handle and shoulder strap — hands-free hauling across the course
- Weighs 1 lb — light enough to tote all day
Description
The Cooler Caddy Jr. is a compact cooler shaped like a miniature golf bag, made from 600 denier polyester. Its fully insulated main compartment uses a heat-sealed liner to hold up to six cans plus ice, so drinks stay cold through a round or a long afternoon outside.
Organization comes from two zippered outside pockets with mesh organizers and two quick-access mesh side pockets, keeping small items separated from the main load. A large handle and an adjustable shoulder strap let the carrier switch between a quick grab and hands-free hauling.
At 1 lb and measuring 9 by 6.5 by 11 inches, it packs easily into a car trunk or a cart. The polyester shell is built to hold up to repeated use, so the cooler stays presentable event after event.
Specifications
| Material | Polyester |
|---|---|
| Dimensions | 9" x 6.5" x 11" |
| Weight | 1 lb |
| Pockets | Two zippered outside pockets with mesh organizers; two mesh side pockets |
| Strap | Adjustable shoulder strap; large carry handle |
| Origin | Imported, decorated in USA |
Decoration & Imprint
5 methods
Your artwork is applied to the front pocket of the cooler, with additional placement available on the top flap. Deboss presses a recessed, ink-free impression into the surface; Embroidery stitches colored thread directly into the fabric; Screen Print lays crisp, opaque spot-color ink on top of the material; Pad Print conforms a thin, flat ink layer to curved or recessed areas; and Heat Transfer bonds a smooth, thin applied layer that flexes with the material. Choose Deboss or Embroidery for bold, simple logos where a tactile or stitched mark carries the branding, and Screen Print, Pad Print, or Heat Transfer for solid spot-color artwork that needs flat, even coverage.
Debossone-time setup $75.00
Debossing presses your design into the material with a heated die, displacing the surface to leave a recessed impression below the surrounding plane. No ink, no added color. The mark is the substrate itself — a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker; bold logos and simple type carry well, while intricate detail rounds and loses definition.
EmbroideryFull-color imprint · 1 location included · one-time setup $12.50
Embroidery stitches your design directly into the fabric, building artwork from dense, interlocking threads rather than laying ink on the surface. Each color is its own thread in a solid shade. The result is a raised, tactile mark with the soft sheen of thread and a slightly dimensional edge. Each shape reads as a clean, saturated block, and the sewn-in design resists fading, peeling, and wear through repeated washing.
Screen Print1 color/location included · one-time setup $62.50 · Up to 6 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Pad Print1 color/location included · one-time setup $62.50 · Up to 4 colors
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Heat Transferone-time setup $85.00 · Up to 4 colors
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Production & Delivery
4 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 4 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 24-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 20 pieces with Deboss.
- How much does it cost per unit?
- Pricing falls with quantity: 20–49 pieces $26.08 each, 50–99 pieces $25.18 each, 100–5,000 pieces $24.34 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $75.00 per order.
- How long does production take?
- Production takes 4 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 24-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Deboss (one-time setup $75.00); Embroidery (Full-color imprint · 1 location included · one-time setup $12.50); Screen Print (1 color/location included · one-time setup $62.50 · Up to 6 colors); Pad Print (1 color/location included · one-time setup $62.50 · Up to 4 colors); Heat Transfer (one-time setup $85.00 · Up to 4 colors).
From our decoration and product guides
- What does a debossed logo look like?
- Debossing presses the design into the material with a heated die, leaving a recessed impression below the surrounding surface. There is no ink and no added color: the mark is the material itself, a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker. More about Debossed →
- Can a deboss include color or fine detail?
- No. Because nothing is added, debossing reproduces shape but not color, and the displaced material rounds the edges of fine lines, small text and gradients. Reserve it for bold, simple logos and type where a subtle, tactile impression carries the branding. For a printed ink color choose pad print or screen print; for crisp, permanent fine detail on a hard surface choose laser engraving. More about Debossed →
- What does an embroidered logo look like?
- Embroidery stitches the design directly into the fabric, building the artwork from dense, interlocking threads rather than laying ink on the surface. Each color is its own thread in a solid shade. The result is a raised, tactile mark with the soft sheen of thread and a slightly dimensional edge, and the sewn-in design resists fading, peeling and wear through repeated washing. More about Embroidery →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SVR00073IN STOCK
SKU: SVR00073
Cooler Caddy Jr. 6-Can Insulated Golf Bag Cooler
Starting At$24.34each
A practical giveaway for golf outings, trade shows, travel, and employee kits.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!