Key Facts
- Expandable side zippered gusset — opens up extra room for bulkier accessories
- Elastic organizer inside — holds cords, adapters, and small gadgets in place
- Hook and loop fastener pouch — a second storage spot on one side of the organizer
- Two magnetic cord wrap organizers included — keep cables coiled and tangle-free
- Mesh back panel — contents stay visible without unzipping the case
- Neoprene and polyester micro mesh — a soft, flexible shell for everyday carry
Description
The Circuit Expandable Tech Organizer is a neoprene zippered case built to keep cables, cords, adapters, and small electronics together in one place. A side zippered gusset expands the case when you need more room, and the polyester micro mesh panel on the back lets you see what is inside without opening it.
Inside, an elastic organizer holds small gadgets, cords, and adapters securely, with a hook and loop fastener pouch on one side for additional storage. Two magnetic cord wrap organizers are also included, so loose cables can be coiled and kept from tangling in transit.
Your artwork is applied to the front pocket center. Heat Transfer lays down solid spot-color artwork as a smooth, thin layer that flexes with the case, while Heat Transfer — Domed Decal seals a full-color graphic under a clear raised resin dome for a glossy, three-dimensional finish. Print is also available.
Specifications
| Material | Neoprene, Polyester Micro Mesh |
|---|---|
| Dimensions | 9.5 in. depth x 2 in. width x 6 in. height |
| Weight | 0.28 lb. |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your artwork is applied to the front pocket center. Heat Transfer suits solid spot-color artwork where flat, even color coverage matters and a smooth low-profile mark that flexes with the material is preferred; Heat Transfer — Domed Decal suits full-color, photographic, or gradient artwork that benefits from physical depth and a sealed, scratch- and weather-resistant surface. Print is also available.
Print1 color/location included · one-time setup $110.00 · Up to 2 colors
Heat Transfer1 color/location included · one-time setup $110.00 · Up to 4 colors
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transfer — Domed Decalone-time setup $110.00 · Full color
Domed Decal (also doming or 3D resin label): a full-color printed adhesive label finished with a clear polyurethane resin that cures into a raised dome over the artwork. The result is a lens-like gloss surface with real physical depth — saturated color sealed against scratches, moisture, and UV fading. Color renders as a full-color process blend that comes close to brand-color references but does not match exact spot inks.
Production & Delivery
approx. 5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: approximately 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Print.
- How much does it cost per unit?
- Pricing falls with quantity: 25–49 pieces $17.66 each, 50–99 pieces $17.05 each, 100–299 pieces $16.48 each, 300–5,000 pieces $15.70 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $110.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Print (1 color/location included · one-time setup $110.00 · Up to 2 colors); Heat Transfer (1 color/location included · one-time setup $110.00 · Up to 4 colors); Heat Transfer — Domed Decal (one-time setup $110.00 · Full color).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: GME0001041IN STOCK
SKU: GME0001041
Circuit Expandable Tech Organizer
Starting At$15.70each, imprint included — one-time setup charged separately
A practical giveaway for trade shows, onboarding kits, and conference swag.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!