Key Facts
- Dual input — USB-A and USB-C connectors fit most wall chargers.
- Three outputs
- Compatibility — works with Apple® 8-Pin, Micro-USB and USB Type-C devices, and charges most power banks and Bluetooth® devices.
- 2A maximum output
- Type-C data transfer
- Construction — aluminum case, polyester outer cable and recycled TP inner cable.
Description
Good Value™ All-Over Charging Cable 2A has dual USB-A and USB-C inputs that fit most wall chargers, plus three outputs. It is compatible with Apple® 8-Pin, Micro-USB and USB Type-C devices.
The cable carries a maximum 2A output and supports data transfer for Type-C devices, and it charges most power banks and Bluetooth® devices. The case is aluminum, the outer cable is polyester and the inner cable is recycled TP.
Specifications
| Brand | Good Value |
|---|---|
| Material | Case: aluminum; outer cable: polyester; inner cable: recycled TP |
| Dimensions | 0.75 in wide x 0.375 in deep |
| Compatibility | Apple® 8-Pin, Micro-USB and USB Type-C devices |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Laser and Pad Print are available for this charging cable.
Laser1 location included · one-time setup $55.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Pad PrintPMSone-time setup $55.00 · Up to 1 color
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Production & Delivery
2 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 2 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 50 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 50–149 pieces $7.96 each, 150–249 pieces $7.69 each, 250–499 pieces $7.43 each, 500–999 pieces $7.08 each, 1,000–5,000 pieces $6.75 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 2 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Laser (1 location included · one-time setup $55.00); Pad Print (one-time setup $55.00 · Up to 1 color).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/198366.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0003274IN STOCK
SKU: BCC0003274
Good Value™ All-Over Charging Cable 2A
Starting At$6.75each, imprint included — one-time setup charged separately
Well suited to trade shows, onboarding kits and conference swag.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!