Key Facts
- 6mm metal gauge — a slim clip body that carries keys without bulk
- Single latch with retractable hinge — the gate opens and closes on a hinged arm
- Not recommended for climbing — built for keys and gear, not load-bearing use
- Laser etching holds fine lines — the mark is cut into the metal, not printed on it
- Material — Metal
- Dimensions — 6mm gauge
Description
This carabiner is a 6mm-gauge metal clip with a single latch and a retractable hinge, sized for keys, tags and small gear. The latch opens on a hinged arm so the clip can be moved between a belt loop, bag strap or ring as needed.
It is not recommended for climbing. Treat it as a utility clip for everyday carrying rather than a load-bearing piece of equipment.
Laser etching cuts the artwork into the metal itself, leaving a permanent, recessed mark in the material's own tone with no added ink. The result holds fine lines and small text crisply, which suits single-tone logos and compact lettering.
Decoration & Imprint
1 method
Your mark is laser etched into the face of the carabiner body, cut below the surface for a permanent, recessed imprint in the metal's own tone.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
approx. 5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: approximately 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 500 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 500–999 pieces $1.71 each, 1,000–2,499 pieces $1.66 each, 2,500–4,999 pieces $1.60 each, 5,000–10,000 pieces $1.52 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- How is it decorated?
- Laser (1 location included · one-time setup $60.00).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/221265.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: LNE0000559IN STOCK
SKU: LNE0000559
6mm Metal Carabiner Keychain with Single Latch
Starting At$1.52each, imprint included — one-time setup charged separately
A practical clip for homeowners, home-improvement promotions and client gifts.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!