Key Facts
- Six-panel steel frame — two-piece construction with traditional steel ribs for a stable canopy
- Heavy 8 oz. UV-treated polyester cover — built to hold up under outdoor sun exposure
- Wind vent at the canopy top — lets air pass through instead of catching under the panels
- Plastic ferrule and runner — the frame's sliding hardware for opening and closing
- 12 lb overall weight — substantial enough to stay put in outdoor settings
Description
This 7-foot market umbrella is built for outdoor dining areas and other open-air venues that need dependable shade. The canopy is a heavy 8 oz. UV-treated polyester cover stretched over a six-panel, two-piece frame with traditional steel ribs, a plastic ferrule and runner, and a wind vent at the top. The 12 lb body gives it enough presence to hold its place on a patio or deck.
Your artwork is applied with Heat Transfer — Four Color / 4CP, which lays photographic, gradient-rich, or many-color graphics onto the canopy as a smooth, thin bonded film. The process holds fine lines, small text, and smooth tonal blends faithfully, so detailed logos and multi-color designs reproduce cleanly across the panels.
Specifications
| Material | Polyester |
|---|---|
| Dimensions | 84 in. arc width x 44.5 in. depth x 94 in. height |
| Weight | 12 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your artwork is applied to the umbrella canopy with Heat Transfer — Four Color / 4CP, which bonds photographic, gradient-rich, or many-color graphics to the polyester cover as a smooth, thin film.
Heat Transfer — Four Color / 4CPFull-color imprint · 1 location included · one-time setup $65.00
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Heat Transfer — Four Color / 4CPFull-color imprint · 1 location included · no setup charge
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Heat Transfer — Four Color / 4CPone-time setup $65.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Production & Delivery
20 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 20 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 6 pieces with Heat Transfer — Four Color / 4CP.
- How much does it cost per unit?
- Pricing falls with quantity: 6–23 pieces $120.23 each, 24–71 pieces $116.31 each, 72–143 pieces $112.65 each, 144–299 pieces $107.60 each, 300–5,000 pieces $103.00 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 20 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Four Color / 4CP (Full-color imprint · 1 location included · one-time setup $65.00); Heat Transfer — Four Color / 4CP (Full-color imprint · 1 location included · no setup charge); Heat Transfer — Four Color / 4CP (one-time setup $65.00 · Full color).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- Where are your products made?
- The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: PEA0000137OUT OF STOCK
SKU: PEA0000137
7' Steel Market Umbrella with UV-Treated Polyester Cover
Starting At$103.00each, imprint included
A practical shade solution for outdoor events, summer promotions, team events, and golf outings.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!