Key Facts
- Food-grade materials — safe container for drinking
- Welded joints — create a tight seal to prevent leaks
- Screw-on lid — keeps contents secure
- Single-wall construction — lightweight and easy to carry
- Material — Metal
- Capacity — 6 oz
Description
This 6 oz flask is made of food-grade materials, providing a safe container for drinking. It is single walled with welded joints and a screw-on lid, which creates a tight seal to prevent leaks.
Quantity pricing
| Quantity | Price per unit |
|---|---|
| 100–299 | $5.36 |
| 300–599 | $5.17 |
| 600–1,199 | $5.00 |
| 1,200–5,000 | $4.76 |
Prices are each, imprint included — one-time setup charged separately.
Decoration & Imprint
3 methods
Your logo can be applied to the flask's surface using Pad Print, Direct to Film, or Laser decoration. Pad Print works best for fine lines and small text on curved surfaces; Direct to Film suits full-color photographic artwork; Laser provides a permanent, recessed mark in the metal's own tone.
Pad PrintingFull-color imprint · 1 location included · one-time setup $60.00
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Full Color DTFFull-color imprint · 1 location included · one-time setup $60.00
Direct-to-film printing lays CMYK ink and a white underbase onto a PET film, then heat-presses the image onto the garment as a flexible bonded layer, with no fabric pre-treatment. It reproduces photographs, gradients, and many-color artwork; the white base carries color on dark cloth. Color lands close to brand references as a process blend, with a smooth, slightly filmic hand.
Laser Engraving1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Shipping
Est. as soon as · approx. 5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: approximately 5 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Ground shipping.
- Cheapest: Estimated delivery by · FedEx Ground.
- Fastest: est. as soon as · FedEx Priority Overnight. Overnight shipping is quoted at checkout.
- We ship within the US. International orders: call 1-844-66-PROMO or chat.
- Need it sooner? RUSH production available — production starts as soon as you upload print-ready artwork, with no proof-approval wait. Rush fee applies; shipping time is additional. Upload before 12 PM CT and production starts the same business day.
Quick answers
Minimums, pricing, setup, turnaround, decoration and samples
- What is the minimum order quantity?
- The minimum order is 100 pieces with Pad Printing.
- How much does it cost per unit?
- Pricing falls with quantity: 100–299 pieces $5.36 each, 300–599 pieces $5.17 each, 600–1,199 pieces $5.00 each, 1,200–5,000 pieces $4.76 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. Rush production is available for a fee, starts as soon as print-ready artwork is uploaded, and skips the proof-approval wait.
- What decoration methods are available?
- Pad Printing (Full-color imprint · 1 location included · one-time setup $60.00); Full Color DTF (Full-color imprint · 1 location included · one-time setup $60.00); Laser Engraving (1 location included · one-time setup $60.00).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/221073.
Questions & Answers
Ask about sizing, imprinting or turnaround
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: LNE0000367IN STOCK
SKU: LNE0000367
6 oz Stainless Steel Flask
Starting At$4.76each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!