Key Facts
- Capacity — 6 oz. (177 mL)
- Material — 304 stainless steel body and lid
- Lid — Tethered screw-on/off lid
- Care — Dishwasher safe; hand washing recommended for imprinted products
- Use limitations — Cold and room temperature liquids only; do not microwave; freezer-friendly
- Leak caution — May leak if tipped or held upside-down
Description
This 6 oz. (177 mL) flask has a 304 stainless steel body and lid with a tethered screw-on/off lid.
Dishwasher safe; however, we recommend hand washing imprinted products. Designed for use with cold and room temperature liquids only. Do not microwave. Freezer-friendly. Caution: Item may leak if tipped or held upside-down.
Specifications
| Brand | Prime Line. |
|---|---|
| GTIN | 00882849687266 |
| Material | 304 Stainless Steel |
| Capacity | 6 oz. (177 mL) |
| Dimensions | 3.5 in W x 4 in H |
| Weight | 0.23 lb |
| Care | Dishwasher safe; hand washing recommended for imprinted products |
Decoration & Imprint
2 methods
Laser and Screen Print are available.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen Print1 color/location included · one-time setup $60.00 · Up to 2 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Production & Delivery
1 business day production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 1 business day after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 50 pieces with Screen Print.
- How much does it cost per unit?
- Pricing falls with quantity: 50–149 pieces $8.04 each, 150–299 pieces $7.78 each, 300–599 pieces $7.54 each, 600–1,199 pieces $7.21 each, 1,200–5,000 pieces $6.90 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 1 business day after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (1 location included · one-time setup $60.00); Screen Print (1 color/location included · one-time setup $60.00 · Up to 2 colors).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/229164.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: PRM0005463IN STOCK
SKU: PRM0005463
6 oz. Stainless Steel Flask
Starting At$6.90each, imprint included — one-time setup charged separately
Suitable for employee gifts, client gifts, or company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!