Key Facts
- Double-wall vacuum insulation — copper lining helps keep drinks hot up to 6 hours and cold up to 21 hours
- BPA-free stainless steel construction — 304 stainless steel interior and 201 stainless steel exterior with copper plating
- Slim base — fits most cup holders
- Care — hand-wash only; do not place in freezer or microwave
Description
A 30 oz. (900 mL) BPA-free double-wall stainless steel vacuum tumbler with an AS plastic twist-on lid and snap-close drink spout. It has a 304 stainless steel interior and a 201 stainless steel exterior with interior copper plating, and the double-wall vacuum with copper lining helps keep drinks hot for up to 6 hours or cold for up to 21 hours. The slim base fits most cup holders.
Hand-wash only. Do not place in freezer or microwave. CO2 laser engraving is not available on the silver color.
Specifications
| Brand | Prime Line. |
|---|---|
| GTIN | 00882849705908 |
| Material | Stainless steel |
| Capacity | 30 oz. (900 mL) |
| Dimensions | 7.87 in height |
| Weight | 0.83 lb |
| Care | Hand-wash only; do not place in freezer or microwave |
Decoration & Imprint
2 methods
Screen Print and Laser — CO2 are available on this tumbler; CO2 laser engraving is not available on the silver color.
Screen Print1 color/location included · one-time setup $60.00 · Up to 1 color
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Laser — CO2one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
1 business day production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 1 business day after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 48 pieces with Laser — CO2.
- How much does it cost per unit?
- Pricing falls with quantity: 48–143 pieces $18.36 each, 144–431 pieces $17.77 each, 432–1,007 pieces $17.23 each, 1,008–5,000 pieces $16.48 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order.
- How long does production take?
- Production takes 1 business day after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Screen Print (1 color/location included · one-time setup $60.00 · Up to 1 color); Laser — CO2 (one-time setup $60.00).
From our decoration and product guides
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
- Which artwork works best for screen printing?
- Bold spot-color shapes, blocks of solid color and simple lettering, where you want strong, opaque coverage that reads clearly. Screen printing holds clean edges on solid shapes and standard lettering, but very fine hairlines, smooth gradients and photographic blends lose definition because each color prints as a flat solid layer. For gradient or photographic artwork choose a full-color process method instead. More about Screen Print →
- Can a screen print match my exact Pantone color?
- Yes. Because every color is a separate, premixed spot ink, screen printing can be mixed to a specific Pantone (PMS) number. Where a product offers it, Pantone matching is an option for an additional charge per color; without it the printer uses the closest standard stock ink color. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: PRM0005622IN STOCK
SKU: PRM0005622
30 oz. Vacuum Insulated Stainless Steel Tumbler
Starting At$16.48each
A practical choice for employee gifts, client gifts and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!