Key Facts
- Double-wall vacuum insulation — holds hot liquids five hours, cold up to 24
- Powder-coated stainless steel body — durable finish over the metal
- Wooden-topped screw-on lid — articulated carrying handle built in
- FDA approved — meets the stated food-contact approval
Description
The SipTek bottle is built from stainless steel with double-wall vacuum insulation, a construction that keeps hot liquids warm for five hours and cold drinks chilled for up to 24. A powder-coated finish covers the exterior, and the screw-on lid carries a wooden top with an articulated carrying handle.
Laser etching cuts your mark into the powder-coated surface itself, leaving a permanent, recessed imprint in the material's own tone rather than an applied layer. The result is a branded bottle that stays presentable through daily use.
Specifications
| Brand | Zipline |
|---|---|
| Material | Stainless Steel |
| Capacity | 22 oz |
| Care | Hand-washing recommended |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your mark is laser etched into the powder-coated body of the bottle, cutting a permanent, recessed imprint in the material's own tone with no added pigment.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Full Colorone-time setup $60.00 · Full color
The supplier lists this decoration only as full color, so the one thing it establishes is coloration: the artwork carries as many colors as it needs — photographs, gradients, blends, and dense multi-color detail — rather than a counted set of solid inks, and there is no color count to choose. How the color reaches the item (direct print, transfer, decal, or sublimation) is the supplier's choice for this product and is not stated in their data, so surface feel, finish, and durability follow that process rather than this label.
Screen PrintFull-color imprint · 1 location included · one-time setup $60.00
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Production & Delivery
7 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 7 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 36 pieces with Screen Print.
- How much does it cost per unit?
- Pricing falls with quantity: 36–71 pieces $13.50 each, 72–143 pieces $13.05 each, 144–287 pieces $12.64 each, 288–5,000 pieces $12.07 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 7 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (one-time setup $60.00); Full Color (one-time setup $60.00 · Full color); Screen Print (Full-color imprint · 1 location included · one-time setup $60.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: ZPE0000416IN STOCK
SKU: ZPE0000416
SipTek 22 oz. Powder-Coated Vacuum Seal Bottle with Wooden Top
Starting At$12.07each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!