20 Oz. Full Laser Two-Tone Himalayan Recycled Tumbler is listed under Travel Mugs & Tumblers - Vacuum and is decorated with your logo by Laser. It costs $25.14 each at the minimum order of 36 pieces, falling to $22.06 each from 1,152 pieces, imprint included — one-time setup charged separately. Production takes 5 business days after proof approval.
Key Facts
- Recycled stainless steel — outer and inner walls
- Double-wall insulation — keeps drinks hot or cold up to 6 hours
- Snap-on, spill-resistant lid — thumb-slide with rubber gasket
- 18 oz. with lid on — capacity with the lid in place
- Hand wash recommended
Description
This 20 oz. tumbler has recycled stainless steel outer and inner walls with a powder-coated, two-tone finish. Double-wall construction insulates hot or cold liquids, keeping drinks hot or cold for up to 6 hours, and the bottom is non-slip.
The snap-on lid is spill-resistant and has a thumb-slide and rubber gasket. Due to the vacuum insulation technology, capacity is 18 oz. with the lid on. The tumbler is BPA free, and hand washing is recommended.
Specifications
| Material | Recycled stainless steel (outer and inner) |
|---|---|
| Capacity | 20 oz. (18 oz. with lid on) |
| Dimensions | 7 in. (height) |
| Weight | 0.78 lb. |
| Care | Hand wash recommended |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Laser decoration is available for this tumbler.
Laser1 location included · one-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 36 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 36–71 pieces $25.14 each, 72–143 pieces $24.40 each, 144–287 pieces $23.38 each, 288–575 pieces $22.45 each, 576–1,151 pieces $22.26 each, 1,152–5,000 pieces $22.06 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $100.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Laser (1 location included · one-time setup $100.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- Are custom drinkware items dishwasher safe?
- It depends on the material and the decoration. The product page lists care instructions in Specifications whenever the manufacturer states them. Where dishwasher safety is not stated, hand-wash: it protects the imprint and, on insulated tumblers and bottles, the vacuum seal. Decorated stainless steel and any item with a metallic or foil imprint should be hand-washed unless the listing says otherwise. More about Drinkware →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0012972IN STOCK
SKU: HTP0012972
20 Oz. Full Laser Two-Tone Himalayan Recycled Tumbler
Starting AtWas $22.45 Now $22.06each, imprint included — one-time setup charged separately
Suitable for employee gifts, client gifts and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!