Key Facts
- Folds from mousepad to stand — the pad reconfigures by hand for either position
- 10W Qi-compatible charging output — powers wireless charging-enabled devices on contact
- Cork and paper construction — a natural-tone surface in the pad's own material
- 9V/2A input with 4 ft. Type-C cable — the cord reaches from pad to port
Description
The Good Value™ 10W Vite Wireless Charging Mouse Pad and Stand is a cork and paper desk pad that serves three ways: flat as a mousepad, folded into a phone stand, or used as a charging pad. A 10W Qi-compatible output charges wireless charging-enabled devices, and the 9V/2A input feeds it through an attached Type-C cable measuring about 4 ft.
Because the pad folds by hand, one item covers the mouse surface and the phone stand a desk otherwise needs two pieces for. The cork and paper build keeps the natural tone of the material on the work surface.
Specifications
| Brand | Good Value |
|---|---|
| Material | Cork, Paper |
| Dimensions | 10.375 in. W x 8 in. H x 2.125 in. D |
| Compatibility | Qi-compatible wireless charging; 10W output; 9V/2A input |
| Origin | Imported, decorated in USA |
Decoration & Imprint
4 methods
Your artwork is reproduced in full color across the pad surface. Full Color suits photographic, gradient, or many-color artwork where the whole image matters more than a count of solid inks; Laser etches a single-tone mark into the surface itself for a permanent, recessed imprint in the material's own tone.
Spot ColorPMS1 color/location included · one-time setup $55.00 · Up to 1 color
Full ColorPMSone-time setup $55.00 · Full color
The supplier lists this decoration only as full color, so the one thing it establishes is coloration: the artwork carries as many colors as it needs — photographs, gradients, blends, and dense multi-color detail — rather than a counted set of solid inks, and there is no color count to choose. How the color reaches the item (direct print, transfer, decal, or sublimation) is the supplier's choice for this product and is not stated in their data, so surface feel, finish, and durability follow that process rather than this label.
Laserone-time setup $55.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Laser — Personalizationone-time setup $55.00
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 20 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 20–49 pieces $26.65 each, 50–99 pieces $25.76 each, 100–249 pieces $24.92 each, 250–5,000 pieces $23.76 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Spot Color (1 color/location included · one-time setup $55.00 · Up to 1 color); Full Color (one-time setup $55.00 · Full color); Laser (one-time setup $55.00); Laser — Personalization (one-time setup $55.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is PMS color matching?
- Pantone Matching System (PMS) color matching means the printer mixes ink to your exact Pantone number instead of substituting the nearest stock color, so the merchandise in the field matches the logo in your brand guide. It is the difference between branded merchandise that looks like your brand and merch that almost does. More about PMS color matching →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0003224IN STOCK
SKU: BCC0003224
Good Value™ 10W Vite Wireless Charging Mouse Pad and Stand
Starting At$23.76each
A desk-ready item for trade shows, onboarding kits, and conference swag.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!