Key Facts
- Faceted jade crystal and stainless steel — polished metal and cut crystal carry the display
- Acrylic ribs hold the bottle snug — the cradle grips the bottle for a steady display
- Machine-made bent jade crystal — small bubbles and slight dimension variance are inherent to the process
- Deep jade tint throughout the glass — thicker sections read more pronounced in color
- Weighs 2 lbs — a substantial piece on a countertop or table
Description
The Wine Cradle is a bottle holder made from faceted jade crystal and polished stainless steel, with acrylic ribs that grip the bottle for a snug fit. It measures 5.5" x 10.75" x 3" and weighs 2 lbs, so it sits with real presence on a countertop or table.
The crystal is machine made and bent, which gives the glass its deep jade tint — the thicker the section, the more pronounced the color. Small bubbles and slight variations in dimension are rare and are not considered defects; they are part of how the piece is produced. Clarity stays good across the body, and the bevels catch light along the edges.
Your logo is laser deep etched into the crystal, carved below the surface for a recessed mark with no added pigment. The imprint area is 2.25"H x 3"W, sized for a clean logo or lettering.
Specifications
| Material | Jade Crystal |
|---|---|
| Dimensions | 5.5" x 10.75" x 3" |
| Weight | 2 lbs |
Decoration & Imprint
1 method
Your mark is laser deep etched into the crystal face of the cradle, carved below the surface for a recessed imprint with no added pigment.
Laser — Deep Etchno setup charge
Deep etching carves your design well into the surface, removing material to leave a recessed, permanent mark. Running deeper than a standard laser pass, the result is strongly dimensional and contoured. The finished mark is the material itself — bare carved tone with crisp shadowed contrast where the cut catches light against the untouched surface. You get a mark you can both see and feel, reading as permanent and material rather than printed on.
Production & Delivery
7 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 7 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 1 piece with Laser — Deep Etch.
- How much does it cost per unit?
- Pricing falls with quantity: 1–5 pieces $89.04 each, 6–24 pieces $85.97 each, 25–5,000 pieces $83.10 each. Prices are per unit.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 7 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- How is it decorated?
- Laser — Deep Etch (no setup charge).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: JCS0000166IN STOCK
SKU: JCS0000166
Wine Cradle in Jade Crystal and Stainless Steel
Starting At$83.10each
A fitting choice for client gifts, employee gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!