Key Facts
- Copper lining holds cold 12 hours — vacuum insulation slows heat exchange through the double wall
- Dual-opening lid with steel straw — chug from the wide port or sip through the straw
- Tapered silicone grip — the contoured center gives your hand a place to hold
- Silicone base pad — cushions the bottom against knocks and scuffs
- FDA compliant and BPA free — meets the stated food-contact standard
- Top-rack dishwasher safe — cleaning stays simple between uses
Description
The Wave® My Wave is a 20oz. water bottle built from double-wall 18/8 stainless steel with a copper lining, a combination that keeps drinks cold for 12 hours. The dual-opening lid works two ways: a wide port for chugging and a steel straw for sipping. A double-injected lid adds a soft integrated carry handle, and the main wide opening makes the bottle easy to clean and easy to load with ice.
In hand, the bottle tapers through the center with a silicone grip that gives your fingers a defined place to rest, while a silicone base pad adds protection where the bottle meets a table or counter. It is FDA compliant and BPA free, and it is top-rack dishwasher safe for routine cleaning.
Specifications
| Brand | Sovrano |
|---|---|
| Material | 18/8 Stainless Steel |
| Capacity | 20 oz. |
| Dimensions | 4.5" W x 3.25" D x 9.38" H |
| Weight | 1 lb. |
| Care | Top-rack dishwasher safe |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your artwork is placed on the body of the bottle. Screen Print lays crisp, opaque color on top of the steel, while Laser — laserX etches a permanent, recessed mark in the material's own tone. Choose Screen Print when the logo depends on solid color, and Laser — laserX when a single-tone, dimensional mark suits the artwork better.
Screen Print1 color/location included · one-time setup $62.50 · Up to 1 color
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Laser — laserX (branded)one-time setup $62.50
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
6 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 6 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 12 pieces with Screen Print.
- How much does it cost per unit?
- Pricing falls with quantity: 12–23 pieces $50.35 each, 24–47 pieces $48.61 each, 48–95 pieces $46.99 each, 96–5,000 pieces $44.75 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $62.50 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 6 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Screen Print (1 color/location included · one-time setup $62.50 · Up to 1 color); Laser — laserX (branded) (one-time setup $62.50).
From our decoration and product guides
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
- Which artwork works best for screen printing?
- Bold spot-color shapes, blocks of solid color and simple lettering, where you want strong, opaque coverage that reads clearly. Screen printing holds clean edges on solid shapes and standard lettering, but very fine hairlines, smooth gradients and photographic blends lose definition because each color prints as a flat solid layer. For gradient or photographic artwork choose a full-color process method instead. More about Screen Print →
- Can a screen print match my exact Pantone color?
- Yes. Because every color is a separate, premixed spot ink, screen printing can be mixed to a specific Pantone (PMS) number. Where a product offers it, Pantone matching is an option for an additional charge per color; without it the printer uses the closest standard stock ink color. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: LGK0002026IN STOCK
SKU: LGK0002026
Wave® My Wave 20oz. Double Wall Stainless Steel Water Bottle
Starting AtWas $45.20 Now $44.75each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!