Key Facts
- Included tools — nail file, 2.5 mm screwdriver, tweezers and toothpick
- Key ring — the Escort is designed to go on a key ring
Description
The Escort is a compact pocket multi-tool. Its included tools are a nail file, a 2.5 mm screwdriver, tweezers and a toothpick, and it has a key ring.
The Escort is offered in multiple color options.
Decoration & Imprint
5 methods
Pad Print, Laser, Digital Print, Digital Print — Haptic and Metal Inlay are available decoration options for this product.
Pad PrintFull-color imprint · 1 location included · no setup charge
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Laser1 location included · no setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Digital PrintFull-color imprint · 1 location included · no setup charge
Digital printing reproduces artwork from a digital file on the product's supported print medium. This may be the item itself or a separate label; the product source determines the medium and attachment. Achievable detail, finish and color matching depend on the product and supplier.
Metal InlayFull-color imprint · 1 location included · no setup charge
Digital Print — Haptic (raised/tactile)Full-color imprint · 1 location included · no setup charge
Haptic (3D) printing is ordinary full-color digital printing enhanced with a transparent lacquer applied selectively over the artwork, building up a raised, touchable relief. Color reproduction is the full-color digital process underneath, so multi-color and detailed artwork renders normally, while the clear haptic layer adds dimension without contributing color of its own.
Production & Delivery
approx. 5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: approximately 5 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 25–249 pieces $15.41 each, 250–999 pieces $14.88 each, 1,000–5,000 pieces $14.38 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Pad Print (Full-color imprint · 1 location included · no setup charge); Laser (1 location included · no setup charge); Digital Print (Full-color imprint · 1 location included · no setup charge); Metal Inlay (Full-color imprint · 1 location included · no setup charge); Digital Print — Haptic (raised/tactile) (Full-color imprint · 1 location included · no setup charge).
From our decoration and product guides
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
- When should I choose pad printing over screen printing?
- When the artwork has fine lines, small text or tight detail that must stay sharp on a contoured or uneven surface, such as a pen barrel or a curved drinkware wall. The conforming pad holds crisp edges where flat methods cannot reach. Pad printing suits fine detail better than flooding large areas, so for broad solid fills, photographs or gradients look at screen printing or a full-color process instead. More about Pad Printed →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: VCY0001313IN STOCK
SKU: VCY0001313
Escort Swiss Army Knife
Starting At$14.38each, imprint included
A compact gift option for homeowners, client gifts and home-improvement promotions.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!