Key Facts
- Seven functions in one tool — blade, scissors, nail file, screwdriver, tweezers, toothpick, and key ring
- Stainless steel construction — resists corrosion through everyday handling and storage
- Compact 2.3 in. length — rides on a key ring without adding bulk
- Made in Switzerland — origin carried on the product
- Transparent blue scales — color runs through the handle material
Description
The Classic SD is a seven-function pocket tool built on a stainless steel frame with transparent blue handle scales. A small blade, scissors, nail file, 2.5 mm screwdriver, tweezers, toothpick, and key ring sit in a body measuring 0.7 in. by 2.3 in. by 0.4 in. — small enough to carry on a key ring, complete enough to handle the small tasks that come up in a day.
Stainless steel resists corrosion through everyday handling, so the tool stays presentable in a pocket, drawer, or glovebox. The transparent blue scales give the handle a distinct look while keeping the tool's profile slim.
Your artwork can be applied by pad print, laser, digital print, or digital print — haptic, each suited to a different kind of mark on the handle surface.
Specifications
| Origin | Made in Switzerland |
|---|
Decoration & Imprint
4 methods
Your mark is applied to the handle scales of the knife. Pad print lays a thin, opaque spot-color ink that conforms to the curved scale surface; laser etches a permanent, recessed mark in the material's own tone; digital print reproduces full-color artwork as a flat image; and digital print — haptic adds a selectively applied clear lacquer that raises the artwork into a tactile surface. For fine lines and small text on the curved scales, pad print and laser hold the sharpest edges; for full-color or photographic artwork, digital print and digital print — haptic carry the detail.
Pad PrintFull-color imprint · 1 location included · no setup charge
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Laser1 location included · no setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Digital Print — Haptic (raised/tactile)Full-color imprint · 1 location included · no setup charge
Haptic (3D) printing is ordinary full-color digital printing enhanced with a transparent lacquer applied selectively over the artwork, building up a raised, touchable relief. Color reproduction is the full-color digital process underneath, so multi-color and detailed artwork renders normally, while the clear haptic layer adds dimension without contributing color of its own.
Digital PrintFull-color imprint · 1 location included · no setup charge
Digital printing sends artwork straight from file to the item — no plates or per-color screens — laying all colors down in a single pass. It carries photographs, gradients, drop shadows, and dense multi-color artwork at high resolution, reading as a flat image on the surface. A specific brand color is rendered as a close full-color process simulation rather than an exact spot ink, and on colored items the substrate shifts the appearance.
Production & Delivery
approx. 5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: approximately 5 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 25–249 pieces $24.68 each, 250–999 pieces $23.82 each, 1,000–5,000 pieces $23.03 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Pad Print (Full-color imprint · 1 location included · no setup charge); Laser (1 location included · no setup charge); Digital Print — Haptic (raised/tactile) (Full-color imprint · 1 location included · no setup charge); Digital Print (Full-color imprint · 1 location included · no setup charge).
From our decoration and product guides
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
- When should I choose pad printing over screen printing?
- When the artwork has fine lines, small text or tight detail that must stay sharp on a contoured or uneven surface, such as a pen barrel or a curved drinkware wall. The conforming pad holds crisp edges where flat methods cannot reach. Pad printing suits fine detail better than flooding large areas, so for broad solid fills, photographs or gradients look at screen printing or a full-color process instead. More about Pad Printed →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: VCY0001316IN STOCK
SKU: VCY0001316
Victorinox Classic SD Swiss Army Knife, Transparent Blue
Starting At$23.03each, imprint included
A practical choice for client gifts, home-improvement promotions, and employee safety programs.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!