Key Facts
- ANSI/ISEA 107 Class 3 — rated for workers who need visibility through a full range of motion
- Two-tone reflective tape pattern — contrasting tape bands for visibility
- Breathable polyester mesh — open mesh construction for airflow
- Zipper closure with two internal lower pockets — secure front fastening and interior storage
- Sizes M through 5XL — one vest style across a wide size range
Description
The Value Two Tone Mesh Vest is a Class 3 safety vest built from breathable polyester mesh with a two-tone reflective tape pattern, a zipper closure, and two internal lower pockets. It is intended for workers who require the highest level of visibility, carry high task loads, and need to stay visible throughout a full range of body motions.
Sizing runs from Medium through 5XL, so a single vest style can outfit a varied crew. Your artwork is applied to the left front pocket with Heat Transfer — Full Color, which reproduces multi-color and gradient-rich marks as a smooth bonded layer on the surface.
Specifications
| Brand | Starline |
|---|---|
| Fabric | Polyester Mesh |
| Sizes | M, L, XL, 2XL, 3XL, 4XL, 5XL |
| Weight (oz/GSM) | 0.66 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Your artwork is applied to the left front pocket of the vest using Heat Transfer — Full Color, which lays down photographic, multi-color artwork with smooth gradients and crisp edges on a thin bonded surface layer.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 18 pieces with Heat Transfer — Full Color.
- How much does it cost per unit?
- Pricing falls with quantity: 18–35 pieces $26.78 each, 36–71 pieces $25.85 each, 72–143 pieces $24.99 each, 144–5,000 pieces $23.80 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What is PMS color matching?
- Pantone Matching System (PMS) color matching means the printer mixes ink to your exact Pantone number instead of substituting the nearest stock color, so the merchandise in the field matches the logo in your brand guide. It is the difference between branded merchandise that looks like your brand and merch that almost does. More about PMS color matching →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0001973IN STOCK
SKU: SAE0001973
Value Two Tone Mesh Safety Vest, ANSI/ISEA 107 Class 3
Starting At$23.80each, imprint included — one-time setup charged separately
Suited to staff uniforms, safety programs, and health care teams.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!