Key Facts
- Copper-lined vacuum insulation — dual-wall stainless steel construction holds drinking temperatures
- Screw-on dual top — wide opening for filling, drinking spout for sipping
- Adjustable metal handle — carry loop moves to suit the grip
- Sweat-free powder-coated finish — exterior stays dry in hand
- Lead-free vacuum seal — sealed liner construction
- 1.42 lb weight — light enough to carry filled
Description
The Urban Peak® 40oz Dual Top Water Bottle is built from dual-wall stainless steel with a copper-lined, vacuum insulated liner, so the exterior stays sweat-free while the contents hold their drinking temperature. A powder-coated finish covers the body, and an adjustable metal handle moves along the bottle for a comfortable carry.
The screw-on plastic dual top gives you two ways to drink from the same bottle: a wide opening for filling and a drinking spout for sipping. The lead-free vacuum seal closes the liner, and the bottle is sized at 11.125 inches tall by 4 inches wide, weighing 1.42 lb.
Specifications
| Brand | Urban Peak |
|---|---|
| Material | Stainless Steel |
| Capacity | 40 oz |
| Dimensions | 4"w x 3.5"d x 11.125"h |
| Weight | 1.42 lb |
| Care | Hand wash only |
| Origin | Imported, decorated in USA |
Decoration & Imprint
4 methods
Your artwork is applied to the side of the bottle. Laser etches a permanent, recessed mark in the material's own tone; Screen Print lays down crisp, opaque spot-color ink; Heat Transfer — Full Color reproduces photographic, gradient-rich artwork on a bonded surface layer. Choose Laser for single-tone logos and fine line work, Screen Print for bold spot-color shapes and lettering, or Heat Transfer — Full Color when the artwork depends on tonal blends and photographic detail.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen Print1 color/location included · one-time setup $60.00 · Up to 4 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Heat Transfer — Full Colorone-time setup $60.00 · Full color
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 12 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 12–24 pieces $27.85 each, 25–49 pieces $26.89 each, 50–99 pieces $25.99 each, 100–5,000 pieces $24.75 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (one-time setup $60.00); Screen Print (1 color/location included · one-time setup $60.00 · Up to 4 colors); Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00); Heat Transfer — Full Color (one-time setup $60.00 · Full color).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002508IN STOCK
SKU: SAE0002508
Urban Peak® 40oz Dual Top Vacuum Insulated Water Bottle
Starting At$24.75each
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!