Key Facts
- Copper-lined insulation — vacuum-insulated, dual-wall stainless steel construction
- Flip straw lid — screw-on lid with a built-in flip straw and two detachable internal PE straws
- Carry handle — sturdy PP plastic handle
- Cup holder friendly — fits in most cup holders
Description
The Urban Peak® 30oz Glacier Vacuum Travel Mug is a dual-wall stainless steel travel mug with a copper-lined, vacuum-insulated liner and a sturdy PP plastic handle. A screw-on lid has a built-in flip straw, and two detachable internal PE straws are included. The mug fits in most cup holders.
The mug is available with Laser, Pad Print and Digital Print decoration.
Specifications
| Brand | Urban Peak |
|---|---|
| Material | 304 stainless steel, PP, PE, silicone |
| Capacity | 30 oz |
| Dimensions | 9.25" H x 5.5" W x 4" D |
| Weight | 1.5 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Laser, Pad Print and Digital Print are available.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Pad Print1 color/location included · one-time setup $60.00 · Up to 4 colors
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Digital PrintFull-color imprint · 1 location included · one-time setup $60.00
Digital printing reproduces artwork from a digital file on the product's supported print medium. This may be the item itself or a separate label; the product source determines the medium and attachment. Achievable detail, finish and color matching depend on the product and supplier.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $27.85 each, 48–95 pieces $26.89 each, 96–243 pieces $25.99 each, 244–5,000 pieces $24.75 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (1 location included · one-time setup $60.00); Pad Print (1 color/location included · one-time setup $60.00 · Up to 4 colors); Digital Print (Full-color imprint · 1 location included · one-time setup $60.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002712IN STOCK
SKU: SAE0002712
Urban Peak® 30oz Glacier Vacuum Travel Mug
Starting At$24.75each, imprint included — one-time setup charged separately
Suitable for employee gifts, client gifts and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!