Key Facts
- Refillable gel pen — swap the ink cartridge instead of replacing the whole pen
- uni Super Ink™ — resists water, fading, and fraud so writing stays legible
- Textured grip — controls the 0.7mm point for smooth, even-flowing lines
- Made in Japan — origin carried on the product data
- Bulk packaging — ships without individual retail wrapping
Description
The uni-ball® 207 Gel Pen is a refillable gel pen with a 0.7mm point and a textured grip that keeps the hand steady through long writing sessions. Its uni Super Ink™ resists water, fading, and fraud, so notes and signatures hold up on the page.
The pen is made in Japan and ships in bulk packaging, which keeps handling simple for large orders. Ink color matches the clip color, so the barrel reads at a glance.
Your artwork is pad printed opposite the clip, where the thin ink layer holds fine lines and small text on the curved barrel. Full-color heat transfer is also available for photographic or gradient-rich artwork.
Specifications
| Brand | uni-ball |
|---|---|
| Length | 5.625 in |
| Weight | 0.02 lb |
| Tip | 0.7mm |
| Mechanism | Refillable |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your mark is pad printed on the barrel opposite the clip, where the thin ink layer conforms to the curve and holds fine lines and small text. For photographic or gradient-rich artwork, full-color heat transfer lays down a smooth bonded layer instead.
Pad Printone-time setup $20.00 · Up to 2 colors
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Heat Transfer — Full ColorFull-color imprint · 1 location included · no setup charge
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 200 pieces with Heat Transfer — Full Color.
- How much does it cost per unit?
- Pricing falls with quantity: 200–499 pieces $2.35 each, 500–999 pieces $2.27 each, 1,000–2,499 pieces $2.19 each, 2,500–5,000 pieces $2.09 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Pad Print (one-time setup $20.00 · Up to 2 colors); Heat Transfer — Full Color (Full-color imprint · 1 location included · no setup charge).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/211619.
From our decoration and product guides
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
- When should I choose pad printing over screen printing?
- When the artwork has fine lines, small text or tight detail that must stay sharp on a contoured or uneven surface, such as a pen barrel or a curved drinkware wall. The conforming pad holds crisp edges where flat methods cannot reach. Pad printing suits fine detail better than flooding large areas, so for broad solid fills, photographs or gradients look at screen printing or a full-color process instead. More about Pad Printed →
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002104IN STOCK
SKU: SAE0002104
uni-ball® 207 Gel Pen, 0.7mm Refillable
Starting At$2.09each, imprint included
A practical choice for giveaways, front-desk handouts, and mailers.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!