Key Facts
- Magnetic frame pieces — two halves clamp the print without a backing board
- Zinc alloy body — metal construction in a rectangular profile
- Doubles as a fridge magnet — the frame mounts on a steel appliance door
- Weighs 0.12 lb — light enough to hang or mail without extra postage planning
Description
This photo frame is built from two zinc alloy pieces that meet around a 6"x8" print. The halves are magnetic, so the picture is held in place between them rather than slid behind a backing board. The rectangular metal body measures 2" wide by 1" high, and the whole frame weighs 0.12 lb.
Because the frame is magnetic, it can also be used as a fridge magnet, putting a photo on a steel appliance door instead of a shelf or desk. That gives the item a second life after the desk it was handed out at is cleared.
Specifications
| Material | Zinc alloy |
|---|---|
| Dimensions | 2" W x 1" H |
| Weight | 0.12 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your artwork is pad printed onto the zinc alloy surface of the frame, where a thin layer of opaque spot-color ink sits nearly flush with crisp edges. Pad print suits fine lines, small text, and tightly detailed artwork; laser etching is also available for a permanent, recessed mark in the metal's own tone, and DIGIBRITE direct-to-garment printing covers full-color artwork with smooth tonal blends. Choose pad print when a specific spot color must stay sharp, laser when the mark should carry no ink at all, and DIGIBRITE when the design runs photographic or many-color.
Pad PrintPMS1 color/location included · one-time setup $40.00 · Up to 2 colors
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Laserone-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Direct to Garment — DIGIBRITE (Hit Promo)PMSone-time setup $100.00 · Full color
DIGIBRITE is a digital full-color imprint, applying photographs, gradients, and multi-color artwork directly onto the item in a single printing pass. The image reads as a flat, high-resolution print with fine detail and smooth tonal blends. Color is converted to a full-color process and rendered as the closest achievable match rather than an exact brand color, and it prints most vividly on white or light items.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 100–249 pieces $5.62 each, 250–499 pieces $5.43 each, 500–999 pieces $5.25 each, 1,000–2,499 pieces $5.00 each, 2,500–5,000 pieces $4.77 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $40.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Pad Print (1 color/location included · one-time setup $40.00 · Up to 2 colors); Laser (one-time setup $100.00); Direct to Garment — DIGIBRITE (Hit Promo) (one-time setup $100.00 · Full color).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/218424.
From our decoration and product guides
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
- When should I choose pad printing over screen printing?
- When the artwork has fine lines, small text or tight detail that must stay sharp on a contoured or uneven surface, such as a pen barrel or a curved drinkware wall. The conforming pad holds crisp edges where flat methods cannot reach. Pad printing suits fine detail better than flooding large areas, so for broad solid fills, photographs or gradients look at screen printing or a full-color process instead. More about Pad Printed →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0012749IN STOCK
SKU: HTP0012749
Two Piece Magnetic 6"x8" Photo Frame
Starting At$4.77each, imprint included — one-time setup charged separately
A fit for client welcome kits, desk drops, and conferences.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!