Key Facts
- Converts lanyard to crossbody or wristlet — adjustable length adapts to how you carry
- Fits phones 4 to 6.7 inches — thin tab slides between phone and case
- Ultra-thin tether — charging port, buttons, and screen stay unobstructed
- Cotton cord and bamboo pendant — soft hand feel with a natural finish
- Zinc alloy clip and metal hook — detach the phone without removing the strap
Description
The Traveler Adjustable Phone Carrier & Lanyard is a convertible strap that moves from neck lanyard to crossbody strap to wristlet by adjusting its length. A thin black tab slides between phone and case, so the carrier fits smartphones from 4 to 6.7 inches without a dedicated mount.
The cord is cotton, the pendant is bamboo, and the clip is zinc alloy with a polyester tab. Because the tether is ultra-thin, it leaves the charging port, buttons, and screen clear during use.
A metal hook lets the phone detach from the strap without removing the carrier. The bamboo pendant gives your laser-etched or pad-printed mark a natural surface that stays presentable through daily handling.
Specifications
| Brand | Ariel |
|---|---|
| Material | Bamboo, cotton, zinc alloy, polyester |
| Dimensions | 19 in. H x 0.375 in. W x 2.25 in. D |
| Weight | 0.076 lb. |
| Compatibility | Smartphones 4 to 6.7 inches |
| Packaging | Bulk |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your mark is laser etched into the bamboo pendant or pad printed in spot color on the pendant surface. Laser suits single-tone logos and fine line work, while pad print holds small text and tight detail on the curved pendant.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Pad PrintPMS1 color/location included · one-time setup $60.00 · Up to 1 color
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 100–249 pieces $3.66 each, 250–499 pieces $3.54 each, 500–999 pieces $3.42 each, 1,000–2,499 pieces $3.26 each, 2,500–5,000 pieces $3.11 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (one-time setup $60.00); Pad Print (1 color/location included · one-time setup $60.00 · Up to 1 color).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/247727.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: AIM0002376IN STOCK
SKU: AIM0002376
Traveler Adjustable Phone Carrier & Lanyard
Starting AtWas $3.41 Now $3.11each, imprint included — one-time setup charged separately
A practical giveaway for trade shows, onboarding kits, and conference swag.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!