Key Facts
- Double-wall vacuum insulation with copper lining — holds beverage temperature for hours
- 18/8 stainless steel body — resists the wear of daily commutes and refills
- Clear BPA-free press-fit lid — black slider is splash and shatter proof
- Powder-coated finish — durable surface that stands up to handling
- Quiet non-slip base — prevents noisy slipping and sliding on desks and tables
Description
The Tervis® Traveler® Tumbler is a 30 oz. vessel built from 18/8 stainless steel with a double-wall vacuum insulation and copper lining, so hot and cold beverages hold their temperature for hours. The clear BPA-free press-fit lid carries a black slider that is splash and shatter proof, and the quiet non-slip base keeps the tumbler from sliding or rattling on a desk.
A powder-coated finish gives this powder coated tumbler a durable surface that stands up to daily handling, and the 4 in. by 4 in. by 8 in. profile fits most cup holders. Your logo is laser etched into the coating as a permanent, recessed mark in the material's own tone, so the branding stays presentable through repeated use.
Specifications
| Brand | Tervis |
|---|---|
| Material | 18/8 stainless steel |
| Capacity | 30 oz. |
| Dimensions | 4 in. W x 4 in. D x 8 in. H |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Your mark is laser etched into the powder-coated body of the tumbler, cutting a permanent, recessed imprint in the material's own tone with no added pigment.
Laser1 location included · one-time setup $55.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $41.53 each, 48–71 pieces $40.10 each, 72–143 pieces $38.76 each, 144–287 pieces $36.91 each, 288–5,000 pieces $35.24 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- How is it decorated?
- Laser (1 location included · one-time setup $55.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0004857IN STOCK
SKU: BCC0004857
Tervis® Powder-Coated Stainless Steel Traveler® Tumbler, 30 oz.
Starting At$35.24each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!