Key Facts
- Flexible magnetic LED tip — extends to 22 inches to reach behind confined areas
- Retrieves up to 3 lbs — magnetic tip lifts small metal parts
- Metal body with magnetic base — base holds the light in place on steel surfaces
- Push on/off button — simple single-button operation
- Four LR44 batteries included — ready to use out of the box
Description
The Telescoping Flex Flashlight is built for the spots a standard light cannot reach. Its flexible magnetic tip extends to 22 inches and carries three bright LED lights, so you can see into and behind confined areas. The magnetic tip also retrieves small metal parts weighing up to 3 lbs.
A metal body and magnetic base let the flashlight hold its own position on steel surfaces, leaving both hands free for the task. A push on/off button keeps operation simple, and four LR44 batteries are included so the tool is ready when it arrives.
Your logo is laser etched into the metal body, creating a permanent, recessed mark in the material's own tone. The mark holds fine lines and small text crisply, which suits single-tone logos and compact artwork on a tool that stays in the drawer or the glovebox.
Specifications
| Material | Metal |
|---|---|
| Dimensions | 6.56" x 0.81" |
| Battery | 4 LR44 batteries included |
Decoration & Imprint
1 method
Your mark is laser etched into the metal body of the flashlight, where the beam cuts a permanent, recessed imprint in the material's own tone with no added color.
Laserone-time setup $55.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
10 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 10 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 50 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 50–99 pieces $9.93 each, 100–149 pieces $9.59 each, 150–249 pieces $9.27 each, 250–5,000 pieces $8.83 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order.
- How long does production take?
- Production takes 10 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- How is it decorated?
- Laser (one-time setup $55.00).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/197760.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: AER0000087IN STOCK
SKU: AER0000087
Telescoping Flex Flashlight with Magnetic Base and LED Tip
Starting At$8.83each
A practical branded item for homeowners, employee safety programs, home-improvement promotions, and client gifts.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!