Key Facts
- ANSI Z87.1 approved — meets the recognized standard for occupational eye protection
- PLATINUM® coating on both sides — exclusive anti-fog and scratch resistance for clear vision and long wear
- 33% recycled polycarbonate — made with post-consumer material for a lower-impact choice
- Microfiber pouch included — keeps glasses clean and protected when not in use
Description
The Swift OTG is built to fit comfortably over most prescription eyewear, making it a practical choice for safety programs and daily wear. The smoke-tinted lens transmits just 13% of visible light, which improves color perception, contrast, and depth while reducing eye strain in bright conditions.
Bolle’s PLATINUM® coating is applied to both sides of the lens, delivering permanent fog and scratch resistance that holds up through repeated use. The frame is molded from 33% recycled polycarbonate, and each pair ships in a microfiber pouch that doubles as a cleaning cloth and a branding surface.
Specifications
| Brand | Bolle |
|---|---|
| Material | 33% recycled polycarbonate |
| Dimensions | 6" D x 5.75" W x 2" H |
| Weight | 0.16 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your artwork is placed on the top of the included microfiber pouch. Heat Transfer – Full Color delivers photographic, gradient-rich artwork with smooth tonal blends, while Pad Print provides crisp, fine-line detail on curved surfaces.
Heat Transfer — Full Colorone-time setup $60.00 · Full color
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Pad Print1 color/location included · one-time setup $60.00 · Up to 2 colors
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 12 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 12–24 pieces $20.35 each, 25–49 pieces $19.64 each, 50–99 pieces $18.99 each, 100–5,000 pieces $18.09 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (one-time setup $60.00 · Full color); Pad Print (1 color/location included · one-time setup $60.00 · Up to 2 colors).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002763IN STOCK
SKU: SAE0002763
Swift OTG Smoke Safety Glasses by Bolle
Starting At$18.09each, imprint included — one-time setup charged separately
Ideal for wellness programs, safety training, employee care kits, and health fairs.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!