Key Facts
- Solar powered with three LEDs — no battery changes needed; charges in sunlight
- Built-in safety whistle — adds emergency signaling to a daily-carry item
- Lightweight at 0.08 lb — adds no noticeable bulk to a key ring
- Packaged in a gift box — ready to hand out without extra wrapping
Description
The Ariel Solar Powered Light & Whistle Key Chain puts a bright LED flashlight and a loud safety whistle on a single split-ring key ring. Three LEDs deliver 12 lumens of light, powered by a built-in LIR2032 lithium-ion battery that recharges from the sun, so you never have to swap cells. The whistle is always there for emergencies, making this a practical everyday tool for homeowners and outdoor use.
Specifications
| Brand | Ariel |
|---|---|
| Material | ABS plastic |
| Dimensions | 2.875" L x 1.375" W x 0.5625" H |
| Weight | 0.08 lb |
| Battery | LIR2032 lithium-ion (rechargeable via solar) |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your artwork is placed on the face of the key chain body. Crystal Print heat transfer delivers a full-color, high-gloss imprint with a subtle raised feel, while pad printing applies up to four spot colors with crisp edges that conform to the curved surface. Choose Crystal Print for photographic or gradient artwork, or pad print when fine lines and small text must stay sharp on the contoured housing.
Heat Transfer — Crystal PrintPMSone-time setup $60.00 · Full color
Crystal Print is a full-color imprint producing high-definition graphics with a glossy, decal-like surface and a subtle raised effect you can see and feel. It reproduces photographs, gradients, and detailed multi-color artwork with fine detail intact. Color is a full-color process blend that comes close to brand references rather than matching exact spot inks.
Pad PrintPMS1 color/location included · one-time setup $60.00 · Up to 1 color
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 100–249 pieces $3.43 each, 250–499 pieces $3.31 each, 500–999 pieces $3.20 each, 1,000–2,499 pieces $3.05 each, 2,500–5,000 pieces $2.91 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Crystal Print (one-time setup $60.00 · Full color); Pad Print (1 color/location included · one-time setup $60.00 · Up to 1 color).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/1782.
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: AIM0000799IN STOCK
SKU: AIM0000799
Ariel Solar Powered Light & Whistle Key Chain
Starting AtWas $3.21 Now $2.91each, imprint included — one-time setup charged separately
A practical giveaway for employee safety programs, home-improvement promotions, and client gifts.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!