Key Facts
- 24% full lead crystal — heavy weight and excellent sparkle from lead content
- Optic crystal base — machine-made, pure, colorless, and highly polished
- Weighs 6 lbs — substantial presence for a desk or shelf display
Description
Craft and Material
This award is made from 24% full lead crystal, a material known for its exceptional sparkle and substantial weight. The eagle figure is perched on an optic crystal base that is machine-made, pure, colorless, and highly polished. Expect minor bubbles and swirls inherent to full-lead crystal, as well as a subtle blue tint that ranges from colorless to light blue.
Presentation and Customization
The eagle's form makes an impressive statement, well-suited for recognizing high achievers. The crystal surface provides a canvas for laser deep etching, which carves a recessed mark with bold contrast and a tactile texture. This permanent imprint adds a personalized touch that honors the recipient's accomplishments.
Sizing and Care
Dimensions are approximately 10 inches by 5.5 inches, and the award weighs 6 pounds. The heavy weight is due to the lead content, which is typical for larger crystal pieces. Not suitable for hot liquids, this award is intended for display. Dimensions may vary slightly due to the handcrafted nature of the crystal.
Specifications
| Material | 24% Lead Crystal-Optic Crystal |
|---|---|
| Dimensions | 10" x 5.5" |
| Weight | 6 lbs |
Decoration & Imprint
3 methods
Your logo is laser deep etched into the crystal surface, creating a recessed mark with bold contrast and a tactile texture. This method is ideal for bold logos and lettering where a deep, permanent mark matters more than color.
Laser — Deep Etchno setup charge
Deep etching carves your design well into the surface, removing material to leave a recessed, permanent mark. Running deeper than a standard laser pass, the result is strongly dimensional and contoured. The finished mark is the material itself — bare carved tone with crisp shadowed contrast where the cut catches light against the untouched surface. You get a mark you can both see and feel, reading as permanent and material rather than printed on.
Laserno setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Laserno setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
7 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 7 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 1 piece with Laser — Deep Etch.
- How much does it cost per unit?
- Pricing falls with quantity: 1–5 pieces $428.62 each, 6–24 pieces $413.84 each, 25–5,000 pieces $400.05 each. Prices are per unit.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 7 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Laser — Deep Etch (no setup charge); Laser (no setup charge); Laser (no setup charge).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: JCS0000463IN STOCK
SKU: JCS0000463
Soaring Eagle 24% Lead Crystal Award
Starting At$400.05each
Ideal for employee recognition, service milestones, and retirement honors.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!