Key Facts
- Integrated LED light — illuminates writing in dim restaurants, lounges, or low-light settings
- Built-in stylus tip — navigates phones and tablets without switching tools
- Aluminum body with soft-touch finish — deep jewel tones and rose gold accents for a premium feel
- Laser engraving on barrel or cap — crisp, permanent mark with no added color
Description
The Rosa Triple Function Pen is machined from aluminum and finished in a soft-touch coating available in deep jewel tones with rose gold accents. A pull cap reveals a ballpoint tip, while the opposite end houses an LED light and a stylus tip, making it a practical tool for note-taking, touchscreen navigation, and low-light environments.
Your brand is laser engraved into the barrel or cap, etching the design into the metal itself for a permanent, recessed mark. The process holds fine lines and small text crisply, delivering a clean, dimensional imprint that won't wear or fade.
Specifications
| Material | Aluminum |
|---|---|
| Length | 5.6" |
| Mechanism | Pull Cap |
| Tip | Ball Point |
Decoration & Imprint
5 methods
Your mark is laser engraved into the barrel or cap, etched into the metal for a permanent, recessed imprint with no added color. The process holds fine lines and small text crisply, making it ideal for single-tone logos and lettering.
Laser1 location included · one-time setup $45.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Laser — Personalizationno setup charge
Laser — Personalizationno setup charge
Laser — Deep Etchno setup charge
Deep etching carves your design well into the surface, removing material to leave a recessed, permanent mark. Running deeper than a standard laser pass, the result is strongly dimensional and contoured. The finished mark is the material itself — bare carved tone with crisp shadowed contrast where the cut catches light against the untouched surface. You get a mark you can both see and feel, reading as permanent and material rather than printed on.
Laserno setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 100–499 pieces $3.28 each, 500–999 pieces $3.16 each, 1,000–4,999 pieces $3.06 each, 5,000–10,000 pieces $2.91 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $45.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (1 location included · one-time setup $45.00); Laser — Personalization (no setup charge); Laser — Personalization (no setup charge); Laser — Deep Etch (no setup charge); Laser (no setup charge).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/244227.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- Where are your products made?
- The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HBN0010231IN STOCK
SKU: HBN0010231
Rosa Triple Function Pen with Light and Stylus
Starting At$2.91each, imprint included — one-time setup charged separately
A natural fit for giveaways, front-desk handouts, and mailers.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!