Key Facts
- Five tools in one barrel — pen, stylus, level, ruler, and screwdriver bit
- Capacitive stylus tip — works with touch screen devices
- Spirit level built in — a working level sits in the barrel
- 4-inch / 10 cm ruler — marked along the pen body
- Reversible Phillips and flathead bit — small screwdriver stores in the pen
- Weighted aluminum body — six-sided barrel with textured grip and pocket clip
Description
The Rockport 5-in-1 Multifunction Pen packs five working tools into a single six-sided aluminum barrel. A twist-action ballpoint writes in black ink, while a capacitive stylus tip handles touch screens, a spirit level sits in the body, a 4-inch / 10 cm ruler runs along the side, and a small reversible Phillips and flathead screwdriver bit stores inside. A textured grip and pocket clip keep it ready at hand.
The aluminum body carries a matte silver and chrome trim finish, and the weighted barrel gives the pen a substantial feel in hand. Laser etching cuts your mark into the metal itself, leaving a permanent, recessed imprint in the material's own tone that holds fine lines and small text crisply.
Specifications
| Material | Aluminum |
|---|---|
| Length | 6.12 in |
| Weight | 0.06 lb |
| Mechanism | Twist-action |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Your mark is laser etched into the aluminum barrel of the pen, cut below the surface for a permanent, recessed imprint that carries no added color and shows the metal's own tone.
Laserone-time setup $62.50
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
6 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 6 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 100–249 pieces $5.24 each, 250–499 pieces $5.06 each, 500–999 pieces $4.89 each, 1,000–5,000 pieces $4.66 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $62.50 per order.
- How long does production take?
- Production takes 6 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- How is it decorated?
- Laser (one-time setup $62.50).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/184444.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: LGK0001994IN STOCK
SKU: LGK0001994
Rockport 5-in-1 Multifunction Aluminum Pen with Stylus
Starting AtWas $5.11 Now $4.66each
A practical giveaway for trade show giveaways, front-desk handouts, and mailers.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!