Key Facts
- Folds flat for storage — keeps the bag on hand in a car trunk
- Two 5.5-inch side handles — short carry option for hand transport
- 25-inch webbed shoulder straps — over-the-shoulder carrying alternative
- Recycled RPET non-woven fabric — made from recycled materials
- Front pocket decoration surface — a defined area for your artwork
Description
The reGen RPET Non-Woven Folding Cargo Carrier Bag is built from recycled RPET non-woven fabric, a material that gives the bag structure while keeping it lightweight. It measures 14.5 inches wide, 11 inches high, and 10 inches deep, providing a spacious main compartment for groceries, supplies, or everyday carry.
Two 5.5-inch side handles offer a short carry option, while 25-inch webbed over-the-shoulder straps let you transport heavier loads with hands free. When not in use, the bag folds flat for compact storage in a car trunk or closet.
The front pocket provides a defined surface for your logo or design. Choose from Heat Transfer — Full Color, Heat Transfer — Four Color / 4CP, Silk Screen, or PermaPress to apply artwork to the front pocket.
Specifications
| Brand | Beacon |
|---|---|
| Origin | Imported, decorated in USA |
Decoration & Imprint
4 methods
Your artwork is applied to the front pocket of the bag. Heat Transfer — Full Color lays down photographic, multi-color artwork with smooth gradients and crisp edges on a thin bonded surface layer. Heat Transfer — Four Color / 4CP applies CMYK process inks for photographic, gradient-rich artwork. Silk Screen and PermaPress are also available for the front pocket. For photographic or gradient-rich artwork, choose Heat Transfer — Full Color or Heat Transfer — Four Color / 4CP; for solid-color designs, Silk Screen or PermaPress may be suitable.
Heat Transfer — Full Colorone-time setup $60.00 · Full color
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Heat Transfer — Four Color / 4CPone-time setup $60.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
BGNW1317 DIA PMS Matchno setup charge · Full color
BGNW1317 DIA Standard Set-UpFull-color imprint · 1 location included · one-time setup $60.00
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 50 pieces with BGNW1317 DIA Standard Set-Up.
- How much does it cost per unit?
- Pricing falls with quantity: 50–99 pieces $13.44 each, 100–249 pieces $12.97 each, 250–499 pieces $12.54 each, 500–5,000 pieces $11.94 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (one-time setup $60.00 · Full color); Heat Transfer — Four Color / 4CP (one-time setup $60.00 · Full color); BGNW1317 DIA PMS Match (no setup charge · Full color); BGNW1317 DIA Standard Set-Up (Full-color imprint · 1 location included · one-time setup $60.00).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- Where do I find the dimensions and imprint area of a bag?
- Overall dimensions are listed in the Specifications block when the manufacturer provides them, and the Decoration & Imprint section lists each imprint location with its imprint size where that is known. If a measurement you need is missing from the page, ask us through the Questions & Answers form and we will confirm it with the manufacturer. More about Bags →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BAN0001769IN STOCK
SKU: BAN0001769
reGen RPET Non-Woven Folding Cargo Carrier Bag
Starting At$11.94each, imprint included — one-time setup charged separately
Ideal for travel, trade shows, and employee kits.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!