Key Facts
- Two light sources — 15W P50 front light and 3W COB barrel light.
- Up to 800 lumens — front-light output, with 150 lumens from the barrel light.
- Rechargeable — includes one 18650 battery and a USB charging cable.
- Adjustable beam — set with push/pull focusing action.
- Aluminum body
Description
The Starline rechargeable flashlight pairs a 15W P50 front light with a 3W COB barrel light. The function button cycles through three front-light modes — high, low and strobe — and a double-click cycles through four barrel-light modes: high, low, constant red and red strobe. Front output reaches up to 800 lumens, and the barrel light puts out 150 lumens.
Run time is approximately 4.5 hours on high, 6 hours on low and 7 hours for the barrel light, with about 4 hours of charge time. The beam adjusts by push/pull focusing action. The aluminum body measures 6.75" wide by 1.5" deep by 1.5" tall and weighs 0.54 lb. Each flashlight includes one 18650 rechargeable battery, a USB charging cable and a manual, and comes in a gift box.
Specifications
| Brand | Starline |
|---|---|
| Material | Aluminum |
| Dimensions | 6.75" w x 1.5" d x 1.5" h |
| Weight | 0.54 lb |
| Battery | 18650 rechargeable battery (included) |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Laser engraving is available on the barrel top.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $23.56 each, 48–95 pieces $22.75 each, 96–243 pieces $21.99 each, 244–5,000 pieces $20.94 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Laser (1 location included · one-time setup $60.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- Where are your products made?
- The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002600IN STOCK
SKU: SAE0002600
Rechargeable 15W P50/COB Flashlight
Starting At$20.94each, imprint included — one-time setup charged separately
Suited to client gifts, home-improvement promotions and employee safety programs for homeowners.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!