Key Facts
- Holds about 12 cards — keeps a working set within reach on the desk
- Wave design in two finishes — brushed and shiny metal alternate across the face
- Stainless steel body — a metal case that resists everyday handling wear
- Sized for a pocket or desk — 3.75 in. wide by 2.375 in. tall
Description
The Good Value™ Premium Business Card Holder is a stainless steel case sized at 3.75 in. wide by 2.375 in. tall and 0.25 in. deep, built to hold approximately 12 business cards. A wave design runs across the face, alternating brushed and shiny metal so the case reads as a finished desk piece rather than a plain sleeve.
Because the cards stay enclosed, they arrive at a meeting uncrumpled and ready to hand over, and the case keeps a working set within reach on a desk or in a pocket. Stainless steel holds up to the handling a card case takes in daily use.
Specifications
| Brand | Good Value |
|---|---|
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your mark is applied to the face of the card case. Full Color reproduces photographs, gradients, and many-color artwork, while Laser etches a permanent, recessed mark in the metal's own tone for single-tone logos and fine line work.
Full ColorPMSone-time setup $55.00 · Full color
The supplier lists this decoration only as full color, so the one thing it establishes is coloration: the artwork carries as many colors as it needs — photographs, gradients, blends, and dense multi-color detail — rather than a counted set of solid inks, and there is no color count to choose. How the color reaches the item (direct print, transfer, decal, or sublimation) is the supplier's choice for this product and is not stated in their data, so surface feel, finish, and durability follow that process rather than this label.
Laserone-time setup $55.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
2 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 2 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 100–249 pieces $6.78 each, 250–499 pieces $6.55 each, 500–999 pieces $6.33 each, 1,000–5,000 pieces $6.03 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order.
- How long does production take?
- Production takes 2 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Full Color (one-time setup $55.00 · Full color); Laser (one-time setup $55.00).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/172064.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is PMS color matching?
- Pantone Matching System (PMS) color matching means the printer mixes ink to your exact Pantone number instead of substituting the nearest stock color, so the merchandise in the field matches the logo in your brand guide. It is the difference between branded merchandise that looks like your brand and merch that almost does. More about PMS color matching →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0003011IN STOCK
SKU: BCC0003011
Good Value™ Premium Stainless Steel Business Card Holder
Starting AtWas $6.68 Now $6.03each
Suited to client welcome kits, desk drops, conferences, and mailers.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!