Key Facts
- Double wall vacuum insulation — keeps drinks hot for 12 hours and cold for 24 hours
- 18/8 stainless steel inner wall — durable and sweat-proof powder coat finish
- Dual-purpose lids — flip-cover sipper for hot drinks, translucent lid with straw for cold
- BPA free and FDA compliant — safe for everyday drinking
- Individually boxed — presentation-ready brown gift box
Description
The Perka Trent tumbler is built for year-round use with double wall vacuum insulation that keeps hot drinks hot for 12 hours and cold drinks cold for 24 hours. The 18 oz. capacity fits most car cup holders, and the sweat-proof powder coat finish protects hands from heat while resisting minor scratches and bumps.
Two screw-top lids adapt the tumbler to the drink: a flip-cover sipper lid for hot beverages and a translucent lid with drinking straw for cold. The tumbler is BPA free and FDA compliant, and each piece is packed in an individual brown gift box.
Specifications
| Brand | Perka |
|---|---|
| Material | ABS Plastic |
| Capacity | 18 oz. |
| Dimensions | 3" D x 2.88" W x 8" H |
| Weight | 0.81 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
4 methods
Your mark is applied to the tumbler's exterior surface. Screen Print lays down crisp, opaque color artwork; Heat Transfer — Full Color reproduces photographic, gradient-rich designs; Laser — laserX (branded) etches a permanent, recessed mark in the material's own tone.
Screen Print1 color/location included · one-time setup $62.50 · Up to 1 color
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Heat Transfer — Full Colorone-time setup $62.50 · Full color
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Laser — laserX (branded)one-time setup $62.50
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Laser — 360 Wrapone-time setup $62.50
A 360 wrap engraving rotates the product under the laser so artwork, patterns, or repeating designs run continuously around the body. Like all laser engraving, the mark is colorless — the finish beneath is revealed in a precise, permanent etch that will not wear or wash away. It suits designs made to be seen from every angle.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Screen Print.
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $20.89 each, 48–95 pieces $20.17 each, 96–239 pieces $19.50 each, 240–5,000 pieces $18.57 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $62.50 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Screen Print (1 color/location included · one-time setup $62.50 · Up to 1 color); Heat Transfer — Full Color (one-time setup $62.50 · Full color); Laser — laserX (branded) (one-time setup $62.50); Laser — 360 Wrap (one-time setup $62.50).
From our decoration and product guides
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
- Which artwork works best for screen printing?
- Bold spot-color shapes, blocks of solid color and simple lettering, where you want strong, opaque coverage that reads clearly. Screen printing holds clean edges on solid shapes and standard lettering, but very fine hairlines, smooth gradients and photographic blends lose definition because each color prints as a flat solid layer. For gradient or photographic artwork choose a full-color process method instead. More about Screen Print →
- Can a screen print match my exact Pantone color?
- Yes. Because every color is a separate, premixed spot ink, screen printing can be mixed to a specific Pantone (PMS) number. Where a product offers it, Pantone matching is an option for an additional charge per color; without it the printer uses the closest standard stock ink color. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: LGK0003938IN STOCK
SKU: LGK0003938
Perka Trent 18 oz. Double Wall Stainless Steel Hot/Cold Tumbler
Starting AtWas $19.02 Now $18.57each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!