Key Facts
- Double-wall vacuum insulation — copper lining helps hold hot 12 hours, cold 24
- 304 stainless steel inside and out — a durable body for daily carry
- Powder-coated exterior — helps reduce sweating on the outside
- Ridged grip surface — easier handling when the bottle is full
- BPA free and FDA compliant — built for food-contact use
- Proceeds support Shelter to Soldier™ — a portion of all proceeds is donated
Description
The Perka® Roak is a 24 oz. bottle built from 304 stainless steel with a double-wall construction, a vacuum seal, and a copper lining for added insulation. Liquids stay hot for 12 hours and cold for 24, so the same bottle works for morning coffee and afternoon water.
A powder-coated exterior helps reduce sweating, and the ridged surface gives you a steadier grip when the bottle is full. The stainless steel twist-off cap has a silicone ring and a hinged steel carry handle for easy pickup.
The bottle is FDA compliant and BPA free, and a portion of all proceeds is donated to Shelter to Soldier™, a non-profit organization that rescues dogs to train as service animals for veterans in need.
Specifications
| Brand | Perka |
|---|---|
| Material | 304 stainless steel with copper lining |
| Capacity | 24 oz. |
| Dimensions | 3 in. W x 3 in. D x 9.75 in. H |
| Weight | 0.96 lb. |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your mark is laser-etched into the surface of the bottle for a permanent, recessed imprint in the material's own tone. Laser — laserX (branded) suits single-tone logos, fine line work, and small text where a permanent, dimensional mark matters more than color; Heat Transfer — Domed Decal suits full-color, photographic, or gradient artwork that benefits from physical depth and a sealed, scratch- and weather-resistant surface.
Laser — laserX (branded)one-time setup $62.50
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Heat Transfer — Domed Decalone-time setup $62.50 · Full color
Domed Decal (also doming or 3D resin label): a full-color printed adhesive label finished with a clear polyurethane resin that cures into a raised dome over the artwork. The result is a lens-like gloss surface with real physical depth — saturated color sealed against scratches, moisture, and UV fading. Color renders as a full-color process blend that comes close to brand-color references but does not match exact spot inks.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Laser — laserX (branded).
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $22.57 each, 48–95 pieces $21.83 each, 96–239 pieces $21.14 each, 240–5,000 pieces $20.19 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $62.50 per order.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser — laserX (branded) (one-time setup $62.50); Heat Transfer — Domed Decal (one-time setup $62.50 · Full color).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: LGK0000770IN STOCK
SKU: LGK0000770
Perka® Roak 24 oz. 304 Stainless Steel Bottle with Copper Lining
Starting At$20.19each
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!