Key Facts
- Three-piece kit — desktop cornhole set, wireless speaker and XL cooler bag
- Cornhole set contents — two wooden boards and four bean bags (two white, two black)
- Cooler capacity — holds up to 24 cans
- Speaker playtime — up to 8 hours on a single charge
- Built-in microphone — for calls on the speaker
Description
The Office Party Kit combines three items for workplace gatherings: a desktop cornhole set, a wireless speaker and an XL cooler bag with a double-zippered, three-sided opening to the main compartment that holds up to 24 cans.
The cornhole set includes two wooden boards and four bean bags, two white and two black. The speaker has a built-in microphone for calls and provides up to 8 hours of playtime on a single charge.
Specifications
| Material | Water-resistant 0.55 mm 7P and 840D/PVC 7P tarpaulin; rubber; plastic; aluminum; wood; pine |
|---|---|
| Dimensions | 12.5 in W x 12 in D x 9 in H |
| Battery | Up to 8 hours of playtime on a single charge |
Decoration & Imprint
4 methods
Heat Transfer — Full Color, Laser, Domed Decal and Full Color — Direct to Substrate are available decoration methods.
Heat Transfer — Full ColorFull-color imprint · 1 location included · no setup charge
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Laser1 location included · no setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Domed DecalFull-color imprint · 1 location included · no setup charge
A full-color printed decal or label finished with a clear, raised resin dome over the artwork. The supplier determines the resin, attachment and achievable detail; this name does not establish heat application or a durability guarantee.
Full Color — Direct to SubstrateFull-color imprint · 1 location included · no setup charge
Full-color artwork applied directly to the item surface rather than a separate label or decal. The supplier determines the printing and curing process. This option does not by itself establish heat application, UV inkjet, durability or a particular number of printing passes.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 1 piece with Heat Transfer — Full Color.
- How much does it cost per unit?
- Pricing falls with quantity: 1–9 pieces $315.90 each, 10–49 pieces $202.43 each, 50–99 pieces $216.63 each, 100–5,000 pieces $195.68 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (Full-color imprint · 1 location included · no setup charge); Laser (1 location included · no setup charge); Domed Decal (Full-color imprint · 1 location included · no setup charge); Full Color — Direct to Substrate (Full-color imprint · 1 location included · no setup charge).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: OIO0000149IN STOCK
SKU: OIO0000149
Office Party Kit
Starting At$195.68each, imprint included
A fit for event giveaways, family events and seasonal promotions.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!