Key Facts
- 500-lumen CREE® LED — bright, efficient illumination with a 150 m beam range
- Glass-filled nylon polymer body — impact and chemical resistant for demanding use
- IP-X7 waterproof rating — withstands immersion up to 1 meter for 30 minutes
- Large textured tail cap switch — momentary or constant-on modes for tactical control
- Includes 1000D water-repellent bag — doubles as a branding surface with a 4" x 3" imprint area
Description
The Nightstick® Polymer Tactical Flashlight combines a durable glass-filled nylon polymer housing with a high-output CREE® LED, delivering 500 lumens of bright, efficient light. Its IP-X7 waterproof rating and impact-resistant construction ensure reliable performance in harsh conditions, while the non-slip grip and large textured tail cap switch provide secure handling and easy mode selection between momentary and constant-on.
Powered by two included CR-123 lithium batteries, this flashlight offers a beam range of 150 meters, making it a practical tool for both everyday carry and professional use. A removable pocket clip and a 1000D water-repellent storage bag add everyday utility, keeping the light protected and accessible.
Specifications
| Brand | Nightstick / Bayco |
|---|---|
| Material | Glass-filled Nylon Polymer |
| Dimensions | 5.5" H x 1.25" W x 1.25" D |
| Weight | 0.42 lb |
| Battery | 2x CR-123 Lithium (included) |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your mark is laser engraved directly into the flashlight body for a permanent, recessed imprint in the material's own tone, or applied as a full-color heat transfer on the included 1000D water-repellent bag. Laser engraving is ideal for single-tone logos and fine line work, while heat transfer suits photographic, gradient-rich artwork with smooth color blends.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 4 pieces with Heat Transfer — Full Color.
- How much does it cost per unit?
- Pricing falls with quantity: 4–11 pieces $118.74 each, 12–35 pieces $114.64 each, 36–71 pieces $110.82 each, 72–5,000 pieces $105.54 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00); Laser (1 location included · one-time setup $60.00).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0001222IN STOCK
SKU: SAE0001222
Nightstick® Polymer Tactical Flashlight
Starting At$105.54each, imprint included — one-time setup charged separately
A practical choice for employee safety programs, home-improvement promotions, and client gifts.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!