Key Facts
- 800 lumens on high — CREE® LED delivers 800/350/140 lumen modes plus strobe
- Aircraft-grade aluminum housing — 6061-T6 with Type III hard anodized finish for impact and chemical resistance
- IP-X7 waterproof — fully submersible, built for wet and demanding conditions
- Serialized for identification — each unit carries a unique serial number
- Includes 1000D water-repellent bag — packaged in a rugged, protective carry bag
Description
The Nightstick® Multi-Function Tactical Flashlight is machined from aircraft-grade 6061-T6 aluminum with a Type III hard anodized finish, giving it a hard-wearing, impact- and chemical-resistant exterior. A large textured tail-cap switch controls momentary or constant-on operation across high, medium, low, and strobe modes, all powered by the included CR-123 lithium batteries.
An IP-X7 waterproof rating means the light keeps working even when fully submerged, and the non-slip grip stays secure in wet hands. Each flashlight is individually serialized for personal identification, and the whole kit arrives in a 1000D water-repellent bag that doubles as a protective carry case.
Specifications
| Brand | Nightstick / Bayco |
|---|---|
| Material | 6061-T6 Aluminum, Type III hard anodized finish |
| Dimensions | 6.25" H x 1.375" W x 1.375" D |
| Weight | 0.48 lb |
| Battery | 2x CR-123 Lithium (included) |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your mark is placed on the front of the flashlight, within a 4"h x 3"w area. Heat Transfer — Full Color applies a smooth, bonded layer that reproduces photographic, gradient-rich artwork with Pantone-matched color and crisp fine lines. Laser etching creates a permanent, recessed mark in the material's own tone, ideal for single-tone logos and fine text where a dimensional, no-color imprint is preferred.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 4 pieces with Heat Transfer — Full Color.
- How much does it cost per unit?
- Pricing falls with quantity: 4–11 pieces $143.74 each, 12–35 pieces $138.78 each, 36–71 pieces $134.16 each, 72–5,000 pieces $127.77 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00); Laser (1 location included · one-time setup $60.00).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0001076IN STOCK
SKU: SAE0001076
Nightstick® Multi-Function Tactical Flashlight
Starting At$127.77each, imprint included — one-time setup charged separately
A practical choice for employee safety programs, home-improvement promotions, and client gifts.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!