Key Facts
- 650-lumen high output — also offers 200-lumen medium, 50-lumen low and strobe modes
- CREE® LED — with a 325 m light range
- Aircraft-grade 6061-T6 aluminum — housing, bezel and tail-cap with Type III hard anodized finish
- IP-X7 waterproof — impact and chemical resistant, with a non-slip grip
- Rechargeable — includes a lithium-ion battery plus a wall- or vehicle-mounted charger with AC and DC power supplies
Description
The Nightstick® Metal Multi-Function Duty Flashlight uses a CREE® LED and an aircraft-grade 6061-T6 aluminum housing, bezel and tail-cap with a Type III hard anodized finish. Output is 650 lumens on high, 200 lumens on medium and 50 lumens on low, plus strobe, with momentary or constant-on modes and a 325 m light range. The IP-X7 waterproof body is impact and chemical resistant, has a non-slip grip and is serialized for personal identification.
Included are one rechargeable lithium-ion battery, a wall- or vehicle-mounted charger, AC and DC power supplies and an anti-roll ring. Laser decoration is available.
Specifications
| Brand | Nightstick / Bayco |
|---|---|
| Material | Aircraft-grade 6061-T6 aluminum with Type III hard anodized finish |
| Dimensions | 8.9 in (depth) x 1.625 in (width) x 1.625 in (height) |
| Weight | 3 lb |
| Battery | 1 rechargeable lithium-ion battery |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Laser decoration is available on this flashlight.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 3 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 3–11 pieces $281.24 each, 12–35 pieces $271.54 each, 36–71 pieces $262.49 each, 72–5,000 pieces $249.99 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Laser (1 location included · one-time setup $60.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- Where are your products made?
- The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0001322IN STOCK
SKU: SAE0001322
Nightstick® Metal Multi-Function Duty Flashlight
Starting At$249.99each, imprint included — one-time setup charged separately
Suited to employee safety programs, home-improvement promotions and client gifts, and a useful everyday tool for homeowners.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!