Key Facts
- 275-lumen output — CREE® LED provides bright, reliable light
- Aircraft-grade 6061-T6 aluminum — Type III hard anodized finish resists wear
- IP-X7 waterproof — survives immersion in up to 1 meter of water
- Rotating bezel ring — adjusts beam from spot to flood
- Momentary or constant-on modes — textured tail cap switch for either operation
Description
Built for the job
The Nightstick® Adjustable Beam Flashlight delivers 275 lumens from a CREE® LED, with a beam range of 109 meters. Its aircraft-grade 6061-T6 aluminum housing, bezel, and tail cap feature a Type III hard anodized finish, providing impact and chemical resistance. The rotating bezel ring adjusts the beam from spot to flood, and the non-slip grip ensures a secure hold.
Ready for daily use
Rated IP-X7 waterproof, this flashlight withstands immersion in water, making it suitable for outdoor and industrial environments. It operates on two AA batteries (included) and offers momentary or constant-on modes via the textured tail cap switch. A 1000D water-repellent bag is included for storage and transport.
Customization
Your logo can be applied via laser etching, which carves a permanent, recessed mark into the aluminum surface. This method is ideal for single-tone logos and fine line work, ensuring a durable brand impression that lasts.
Specifications
| Brand | Nightstick / Bayco |
|---|---|
| Material | 6061-T6 Aluminum, Type III hard anodized finish |
| Dimensions | 5.8"H x 1"W x 1"D |
| Weight | 0.46 lb |
| Battery | 2x AA (included) |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your logo is laser etched into the front face of the flashlight barrel, creating a permanent, recessed mark in the aluminum's own tone. This method is best for single-tone logos and fine line work, ensuring a durable, high-contrast brand impression.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 12 pieces with Heat Transfer — Full Color.
- How much does it cost per unit?
- Pricing falls with quantity: 12–24 pieces $53.74 each, 25–49 pieces $51.88 each, 50–99 pieces $50.16 each, 100–5,000 pieces $47.77 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00); Laser (one-time setup $60.00).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0000956IN STOCK
SKU: SAE0000956
Nightstick® Adjustable Beam Flashlight, 2 AA
Starting At$47.77each, imprint included — one-time setup charged separately
Ideal for employee safety programs, client gifts, and home-improvement promotions.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!